Vacuum Catalogue - Edwards

TAG Controller2Page64The TAG (Turbo & Active Gauge) controller is a small, compact, low cost pumping systemController, which is suitable for a wide range of vacuum applications. It is a 24V controllerthat is compatible with all Edwards DX and nEXT turbopumps. It contains no power sourceand thus you either need to supply your own power or buy the optional power supply. Inaddition to a turbopump it can control a backing pump, a vent valve, an air cooler and anEdwards active gauge.The TAG Controller is controlled by an easy to use interface. A large clear LED displayshows the pump speed or vacuum pressure. The compact size of the controller is ideal foruse on bench-tops or suitable mobile platforms.Features & BenefitsDimensions●●●●●Compatible with all Edwards 24V turbopumps enabling pumpcontrol and speed displayStart/stop control of a backing pump for full system control(external relay may be required)Turbomolecular pump start options: start with backing pump,start after time delay or start at pressure set pointVent valve control options: controlled vent from full speed, ventfrom half speed or no ventPressure display from a compatible active gauge in mbar, Torr orPaA Contrôleur TIC (Turbo and Instrument Controller), 200 WB Câble secteur / cordon de raccordementC WRG-S-NW25D Pompe à membrane 24 V c.c. XDD1E EXT75DX ISO63F Refroidisseur par air ACX75G Cordon rallonge XDD/DX/EXDCH Cordon rallonge XDD/DX/EXDC (en option)JCâble pour jauge activeK Alimentation électriqueShop online at www.edwardsvacuum.com