Brisque to Lotem 800 II / Lotem Quantum Family - Kodak

Press Format 254. Define Margins: Head, Tail—are non-imageable plate areas accordingto the currently selected Press Format. Two strips of emulsion remainon the plate (shaded areas), 6 mm at the head and 6 mm at the tail.Left, Right - side margins of the plate that will not be exposed. Aminimum value of 0 mm for both side margins is acceptable.5. Define Plate Thickness—minimum and maximum plate thicknessaccording to the currently selected press format.Note: Do not enter a maximum thickness value larger than the value defined inthe PC controller database (this value can be seen in the Plate Set parametersdialog box of the Brisque).Note: Max. Screen Frequency - not supported (this value is for informationonly and not taken into account during plate expose).Device List - the connected Lotem is listed. Currently only one Lotem can beconnected to the Brisque.6. Define Punch System—from the list, select the punch that is currentlyinstalled in the Lotem, according to the punch holes in the press, andwhich were initially configured in the PC Controller (refer to theInstallation Guide of your platesetter for details).7. Comment (optional)—you can enter here any comment to bedisplayed in the Press Format List dialog box.8. Click Save to store the new Press Format. The data is saved on theBrisque and is also transferred to the PC controller database.