Brisque to Lotem 800 II / Lotem Quantum Family - Kodak

Defining the Plate Expose Parameters 792. From the Press Format menu, select the relevant Press Format fromthe list of Press Formats defined in the Devices application on theBrisque. The default Press Format is the one last selected in theDevices application.Note: If the parameters of the selected Press Format match the selected PlateSet, its name appears green. If they do not match, the Press Format nameappears red. The criteria for a mismatch between the Press Format and Plate Setare plate size and plate thickness.3. The currently selected Punch system(s) is listed in the Punch box.• To use the listed punch, make sure the Punch check box is selected.• Click the Punch Params button to view the Punch parameterswhich include Plate Set, Plate Size, Exposable Area, Punch System,and a punch thumbnail. Defaults are according to predefinedparameters of the selected Press Format, and are imported fromthe Devices application.4. Define the [0,0] offset reference point on the plate.From the Alignment menu, select either Top Left or Top Center.(0,0) Top Left(0,0) Top CenterAroundthe DrumDrumPlateAlong theDrumFigure 5: [0,0] reference offset points on plate relative to drum.See page 84 for further details on image placement.5. Define the image offset in the Image Offset boxes.The Image Offset parameter shifts the Layout on the plate from the[0,0] reference point (Top Center or Top Left alignment - see previousstep). Exposure begins from this position.