Brisque to Lotem 800 II / Lotem Quantum Family - Kodak

Defining the Plate Expose Parameters 819. Select Print Slugs to print slugs in the plate head margin (that is, time,date, Job name, separation name, flat name, and Screen Set name)together with your plate exposure.10. When you select Print Slugs, the word Labels appears in the R-icongraphic in the upper left corner of the screen.• Click the Slug Params button to select which slugs to print and todefine the Slug offset. Assign the settings from the CTP SlugParams dialog box that opens.Note: The Plate ID is always printed to the left of the Slug, however you canreposition the offset of the Plate ID slug in the CTP Slug Params dialog box.• Enter text within the User Label box to add a descriptive label tothe slug (the Print Slugs check box must be selected).11. The Excurve box shows the currently selected Excurve calibration filewhich corrects for density and dot percentage variations. To assign adifferent Excurve, click the Excurve List button, and select the Excurvefile you calibrated in Excurve Calibration on page 27.Note: This parameter is optional. You may expose the image without applyingan Excurve file.The Excurve must be selected according to the Plate Expose defined by theselected Screen Set and according to the Excurve Auto Select parameters thatwere defined in the Calibration application.12. The Tone Rep. box displays the currently selected Tone ReproductionCalibration Curve to be applied to the exposure. To assign a ToneReproduction Curve, click the Tone Rep. List button, and then select apredefined Tone Reproduction Curve file.Note: This parameter is optional. You may expose the image to plate withoutapplying a Tone Reproduction curve. For information on Tone ReproductionCurves, see Tone Reproduction on page 42.