Contact Technical Support

CADC MessagesCADC814E — volser ALREADY IN FILE AS 'data-set-name' volser ALREADY IN FILE AS EXTERNALLYOWNED volser ALREADY IN FILE AS SCRATCHReason:The first form of the message is issued if an attempt is made to add or initialize avolume serial number which is already associated with an active data set.The second form is issued if an attempt is made to add a volume serial numberwhich is already in the Catalog and is owned by another product.The third form is issued if an attempt is made to reinitialize a tape which isalready in the file as a SCRATCH tape, that is, potentially creating two physicalvolumes with the same number.Action:No response is permitted to the first and second forms of the message.In response to the third message, verify the reel number to be added. If thevolume is a scratch tape which is to be reinitialized, reply 'ACCEPT'.CADC815E — VOLUME NO xxxxxx ALREADY IN FILE, STATEMENT BYPASSEDReason:The user is attempting to add a duplicate reel number, which is not allowed.This message will also result if one and two are true, or three or four is true:1. The INT function is being performed the mounted volume is already acontrolled volume2. The user has responded with something other than "ACCEPT" to aCADT010D or CADC814E message3. The volume is externally ownedAction:None. The statement is ignored.CAD Messages 3–77