12.07.2015 Views

Contact Technical Support

Contact Technical Support

Contact Technical Support

SHOW MORE
SHOW LESS
  • No tags were found...

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

CADS MessagesCADS135I — PHASE-1 INITIALIZATION COMPLETEReason:This is issued after the 'INITIAL PHASE-1' command has been successfullyprocessed.Action:None.CADS136E — NO PREVIOUS PHASE-1 INITIALIZATIONReason:This is issued when an 'INITIAL PHASE-2' command is processed and theinformation created by the PHASE-1 initialization in system GETVIS storagecannot be located. Most likely the PHASE-1 initialization step was not run.Action:Ensure that PHASE-1 initialization is being performed first. If the problempersists, contact CA for assistance.CADS137I — ADAPTER SVC NUCLEUS -- LOADED AT xxxxxxReason:This is an informational message generated by the CASAUTIL LIST ALLcommand.Action:None.CADS138I — ORIGINAL SVC HANDLER -- LOADED AT xxxxxxReason:This is an informational message generated by the CASAUTIL LIST ALLcommand.Action:None.CAD Messages 3–127

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!