12.07.2015 Views

Contact Technical Support

Contact Technical Support

Contact Technical Support

SHOW MORE
SHOW LESS
  • No tags were found...

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

CASS MessagesCASS301E — xxxxx STORAGE TOO SMALLReason:The storage value specified in the parameter table or in a SRTCORE call is belowthe absolute minimum. Each sort must have at least 10K of storage to operate. Inaddition, if CA-SRAM modules are not in the SVA, the first sort must beallocated an additional 25K for module storage. Performance will probablyimprove if more storage than the minimum is specified.Action:Correct the program to specify a larger storage value.CASS302E — xxxxx STORAGE NOT AVAILABLEReason:Storage specified in the parameter table or SRTCORE call is not available in thepartition or in the storage parameter specified in the SRAM macro.Check the program and macro parameters insuring that the available storageconforms to the storage requirements specified in the SORTCORE.Action:Increase the partition size or the SIZE=nnnK value on the EXEC statement ifunder DOS/VS or DOS/VSE. Remember, SIZE=AUTO must never be used.CASS303E — INIT NO ROOM FOR SRAM MANAGERReason:The size of the load area within the CA-SRAM language interface linked to theapplication program is not large enough to contain the nonreentrant loader andstorage management program to be loaded. This condition should never occur.Action:Save all documentation produced and call CA <strong>Technical</strong> <strong>Support</strong>.CAS Messages 7–9

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!