Contact Technical Support

CALC MessagesCALC268E — TOO MANY LINES FOR PAGEDEPTHReason:The number of heading and footing lines is too great for the page depth. Thecompiler calculates the number of print lines per page required to print the pageheadings, plus the specified TITLE and FOOT lines. If this total is more than thetotal number of lines on the page (either the specified OPTION PAGE= value orthe installation default), there is no room available to print detail lines.Action:Set the OPTION PAGE= to a larger value or reduce the number of heading andfooting lines.CALC269E — ONLY ONE USER STATEMENT ALLOWEDReason:More than one USER statement has been specified for this run.Action:Remove the second USER statement.CALC270E — CANNOT USE PRESORT RESULT FIELDS AS REPORT TIME RESULTSReason:A field specified as a result field in a SET(D) or SET(T) statement has also beenused as a result field in a presort statement (for example, DECODE or SET). Afield used in a presort SET or DECODE statement cannot be specified as apostsort SET(D) or SET(T) result field. Fields to be used as postsort result fieldsmay only be defined with a DEFINE statement presort, or they may be implicitlydefined by the SET(D) or SET(T) statement.Action:Specify a separate postsort field as a result field.CAL Messages 6–53