Contact Technical Support

CADS MessagesCADS145E — VSE PRODID DEFINE ERROR. RC=(xxxxxxxx) PRODUCT NOT DEFINED -yyyyyyyyyyyyyyyyReason:During CASAUTIL Initialization, the System Adapter tried to define itself to theIBM VSE/ESA 2.1 Operating System with the TURBO Dispatcher active, but thisdefinition has failed. RC=(xxxxxxxx) is the return code from the PRODIDdefinition function. 'yyyyyyyyyyyyyyyy' is the name of the Product for whichthe failure occurred. Return codes for RC=(xxxxxxxx):8 Security check failed16 $IJBVEND is not loaded20 System GETVIS errorAction:Check the return codes to determine the cause of failure. Refer to the return codesection for more information.CADS146E — WRONG VERSION/MOD LEVEL OF SYSTEM ADAPTER (x.x)Reason:During CASAUTIL Initialization, the System Adapter detected a mismatch in theversion of CASAUTIL and the initialization Transients. x.x is the current versionof the Transient issuing the message.Action:Ensure that you do not have a case of mixed modules from a prior version of theSystem Adapter or any of the System Adapter $$BCA phases in your SYSRESlibrary from a prior version.CADS147E — yGETVIS FOR SVC EXIT FAILED. RC=(xxxxxxxx)Reason:During CASAUTIL Initialization, the System Adapter failed to acquire storage.The 'xxxxxxxx' is the return code of the GETVIS attempt. The 'y' indicates if theattempt was for partition storage (P) or system storage (S).Action:From the return codes, determine the storage error, correct, and resubmit.3–130 Message Guide