12.07.2015 Views

Contact Technical Support

Contact Technical Support

Contact Technical Support

SHOW MORE
SHOW LESS
  • No tags were found...

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

CALR MessagesCALR843E — INVALID ASSIGNMENT FOR SYSLST OR SYSPRINReason:SYSLST or SYSPRIN is unassigned or not assigned to a valid device.CA-EARL by default allows printing reports in mixed (upper and lower) case. Ifyour printer does not support mixed case, this option needs to be changed in theEARLGEN macro. Refer to the "CA-EARL Generation Macro" section of the CA-EARL Systems Programmer Guide for details.Action:Assign SYSLST to a printer and SYSPRIN to a printer, disk, or tape.CALR844E — RECEIVED SEGMENT xxxxxxxx FROM DATABASE yyyyyyyy LONGER THAN DEFINEDMAXLENGTHReason:In the definition of the database (DB-statement), the defined MAXLN is less thanthe longest segment in the PCB used for this database.Action:Change the MAXLN parameter to the correct value.CALR845E — MIXED USE OF SEQ, GET WITH THE SAME PCB NOT ALLOWEDReason:It is impossible to hold more than one position for the same PCB. This wouldhappen if two GETs for the same PCB are active at the same time. Two differentPCBs for this database should be used if more than one position in the databaseis needed.Action:Specify another DB statement for the same database and refer to that on thesecond GET statement.6–88 Message Guide

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!