12.07.2015 Views

Contact Technical Support

Contact Technical Support

Contact Technical Support

SHOW MORE
SHOW LESS
  • No tags were found...

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

CA3 MessagesCA3C095E — PHASE NOTE FOUND, LOCATE(xxxxxxxx). R15(nnnnnnnn)Reason:The required phase (xxxxxxxx) was not found. R15 is the return code from thesystem adapter LOCATE function in hexadecimal.18 Phase not found20 No Storage AvailableAction:Ensure the correct LIBDEF PHASE,SEARCH is specified if the phase was notfound. Ensure enough partition storage is available for the LOAD of the phase.CA3C096E — ERROR ON GETAREA FOR EVTReason:There is insufficient storage in the SVA GETVIS area.Action:Consult the Administration Guide for CAICCI storage requirements, and enlargethe SVA GETVIS area.CA3C097E — CCI/VSE IS SUPPORTED ONLY FOR VSE/SP 4.1 AND UPReason:CAICCI is not supported for VSE releases prior to VSE/SP 4.1.Action:None.CA3C098E — SYSTEM ADAPTER HAS NOT STARTED CCI/VSEReason:System Adapter was not instructed to start CCI/VSE during initialization.Action:Refer to the START command for the CASAUTIL program in the AdministrationGuide.8–4 Message Guide

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!