Contact Technical Support

CADS MessagesCADS026E — CA-IUCV SUPPORT INITIALIZATION FAILED, ERROR CODE X'nnnnnnnn'Reason:IUCV has detected an error which prevents initialization from continuing.Action:Based on the return code displayed as X'nnnnnnnn', choose the appropriateaction from the following list:Code0400nnnn0500nnnn0700nnnn0800nnnn0900nnnn0C00nnnnMeansAn error occurred in initializing a IUCV second-level intercept. Seethe message displayed prior to this one.An error has occurred while trying to enqueue or dequeue aresource. Contact CA Technical Support.The XPR$CPIT phase was not loaded into the SVA via a SET SDLcommand. See the CA-Dynam for VSE Getting Started.There are no more entries in the XPR$CPIT phase. Contact CATechnical Support.Insufficient storage in SVA for tables. Increase the SVA.The CAKNLV1A or CAKNLV2A phase could not be located.Check the LIBDEF string to make sure that the library where these2 phases reside is accessible.For any other codes, contact CA.CADS027W — LOGICAL ASSIGNMENT FAILED, INITIALIZATION CONTINUESReason:CA-DYNAM was unable to acquire the high LUB (SYS number) in the BGpartition during CASAUTIL system initialization, probably because the LUB wasnot assigned UA. CA-DYNAM requires this LUB for AR command processing.Action:CA-DYNAM Attention Routine commands are disabled and system initializationcontinues. Resolve the assignment of the BG high LUB and IPL to enableCA-DYNAM AR commands.3–112 Message Guide