Contact Technical Support

CADS MessagesCADS002E — PHASE=xxxxxxxx NOT FOUND IN SHARED VIRTUAL AREAReason:The named phase must reside in the shared virtual area for system initialization,and it was not found.Action:Correct the SDL/SVA load procedure to include the named phase. The namedphase should be placed after the appropriate SET SDL command issued prior tosystem initialization.CADS003I — INITIALIZATION HAS FAILED INITIALIZATION SUCCESSFUL -- CPU=xxx..x SYSTEM=xINITIALIZATION NOT REQUIRED, SYSTEM ALREADY ACTIVEReason:This message indicates the final status of the system initialization request. TheCPU serial number and system ID are referenced for documentation.Action:If the initialization has failed, correct the error condition noted in the previousmessage and reinitialize.CADS004I — CA-xxxxxxxx IS ACTIVE -- VL = n.n GENLEVEL = xxxxxxxx CA-xxxxxxxx IS NOTOPERATIONALReason:This message indicates which CA products, including the release and genlevel ofeach, are active in the system.If the second form of the message appears, it indicates that the named product ispresent but could not be activated for the reason given in the following message.Action:If the named product could not be activated, correct the error condition noted inthe following message and re-IPL.CAD Messages 3–105