Volvo XC90 Owners Manual.pdf - ESD - Volvo

09 Maintenance and service09Replacing bulbs– Place the insert on a soft surface so as notto scratch the glass.– Turn the bulb holder anticlockwise andpull it out.– Turn the bulb anticlockwise to loosen it.(Applies to direction indicators, reversinglamps and brake lamps).– Pull the bulb straight out. (Applies to positionlamps).– Replace the bulb.– Refit the bulb holder in the recess and turnclockwise.– Press back the extra length of cable.– Refit the insert against the bolt holes.Press the insert into place.– Tighten the nuts.– Refit the side panel and corner piece.Rear fog lamp– Insert a slotted screwdriver as indicatedby the arrow in the illustration.– Prise out the lamp insert.– Turn the bulb holder anticlockwise to loosenit.– Turn the bulb anticlockwise and lift thebulb out.– Replace the bulb.Number plate lighting– Switch off all lights and turn the ignitionkey to position 0.– Remove the screws with a screwdriver.– Loosen the whole lamp housing carefullyand pull it out.– Replace the bulb.– Refit the entire lamp housing and screw itinto place.200