A-ISOMETERÂ® IRDH375 IRDH375B - Bender

More documents

Recommendations

Info

INDEX- ISO ADVANCED 45- ISO SETUP 42- LANGUAGE 51- PASSWORD 50- SERVICE 52Menu structure 39OOperating 33Operating features and displays 33Option „W“ 13Ordering details 72PParameterization via Internet 52Password, activating and setting 50Product description 14System fault LED 15System fault relay K3 27system leakage capacitance, setting 46TTechnical data IRDH375 61Terminating resistor 55TEST button 33Topology RS485 56WWiring 56wiring diagram A-ISOMETER 27RReal-time clock 17RESET button 14, 33Response values Alarm 1 and Alarm 2 setting42RS485 interface 55RS485 network- correct arrangement 56- wrong arrangement 56SSelf test, A-ISOMETER 33Setting the bus address for IRDH375B 48Setting the date (IRDH375B) 46Setting the real-time clock (IRDH375B)46Setting the system leakage capacitance 46Standards 64Status number 7076 TGH1352en/11.2004
INDEX77 TGH1352en/11.2004
Page 1 and 2:
Operating ManualInsulationR =010KWf
Page 3 and 4:
Table of Contents1. Safety informat
Page 5 and 6:
Table of Contents5.6.1 Bus address
Page 7 and 8:
1. Safety information1.1 Use for th
Page 9 and 10:
Safety information1.2.4 Inspection,
Page 11 and 12:
Safety information1.4 Directions fo
Page 13 and 14:
2. Function2.1 Common characteristi
Page 15 and 16:
Functionmessage, provided that the
Page 17 and 18:
Function2.5 Additional functions IR
Page 19 and 20:
FunctionISOnet Function (COM SETUP)
Page 21 and 22:
3. Commissioning flow chart (threep
Page 23 and 24:
Commissioning flow chart (threepart
Page 25 and 26: 4. Connection4.1 WiringIRDH375(B) h
Page 27 and 28: ConnectionLegend to wiring diagram:
Page 29 and 30: Connection4.2.2 Connection with AGH
Page 31 and 32: ConnectionIn case of current-contro
Page 33 and 34: 5. Operation and setting5.1 Operati
Page 35 and 36: Operation and setting5.1.3 Function
Page 37 and 38: Operation and settingTGH1352en/11.2
Page 39 and 40: Operation and setting5.2.1 Diagram
Page 43 and 44: Operation and settingDiagram ISO SE
Page 45 and 46: Operation and setting5.5 Menu ISO A
Page 51 and 52: Operation and setting5.8 Menu LANGU
Page 53 and 54: 6. Serial interfacesThe A-ISOMETERs
Page 55 and 56: Serial interfaces6.2 RS485 interfac
Page 57 and 58: Serial interfaces6.4 BMS protocol (
Page 59 and 60: Serial interfacesThe following tabl
Page 61 and 62: 7. Technical data IRDH375(B)7.1 Dat
Page 63 and 64: Technical data IRDH375(B)General da
Page 65 and 66: Technical data IRDH375(B)7.3 Charac
Page 67 and 68: Technical data IRDH375(B)Current ou
Page 69 and 70: Technical data IRDH375(B)Current ou
Page 71 and 72: Technical data IRDH375(B)Dimension
Page 73 and 74: Technical data IRDH375(B)7.4.3 Coup
Page 75: INDEXAAGH... 28Alarm LED 1 33Alarm
show all

A-ISOMETERÂ® IRDH375 IRDH375B - Bender

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?