CONVENTIONAL FIRE PANELS - Kotesa

More documents

Recommendations

Info

29,0a)VOLTAGE (V)28,027,427,026,0-10 -5 0 5 10 15 202225 30 35 40 45 50TEMPERATURE (°C)Figure 22 Switching Power Supply Output Voltage graph. To find the Output Voltage using the graph: — indicate theProbe temperature on the TEMPERATURE (°C) axis; draw a line from the temperature value point up to the curve a);draw a line from the intersection point across to the VOLTAGE (V) axis; adjust the Output Voltage of the Switching PowerSupply to the resultant value. For example, if the Probe temperature is 22 °C, the Output Voltage of the SwitchingPower Supply must be set at 27.4 V.TEMPERATURE (°C) -10 -5 0 5 10 15 20 25 30 35 40 45 50VOLTAGE (V) 29.0 28.8 28.6 28.2 28.0 27.8 27.4 27.2 27.0 26.8 26.6 26.4 26.2Table 3 Switching Power Supply Output Voltage chart. To find the Output Voltage using the chart: — select the nearestvalue to the Probe temperature on the TEMPERATURE (°C) row; read the respective value on the VOLTAGE (V)row; adjust the Output Voltage of the Switching Power Supply to the indicated value. For example, if the Probe temperatureis 22 °C, the Output Voltage of the Switching Power Supply must be set at 27.4 V.36 Conventional Fire Panels J424/J408
PROGRAMMING FROM A PCYou can program this system from the Control panel orfrom a computer, using the J400 application.This section describes how to program the system froma computer. If you intend programming the system fromthe Control panel refer to the “PROGRAMMING FROMTHE PANEL” section.Enrolling: Expander ModulesThe Expander Modules page will allow you to enrolExpander Modules, as follows. Enrol the Expander Modules (if installed).A tick () indicates that the respective device is part ofthe system.Description This 16 character field will allow you to assigna label to the Expander Module. For example, if theExpander Module monitors a particular part of the premises,it may be useful to assign the name of the areaconcerned. The assigned label will identify the ExpanderModule in all the operations it is involved in.Enrolling: Extinguishment ModulesThe Extinguishment Modules page will allow you toenrol and set up Extinguishment Modules, as follows. Enrol the Extinguishment Modules (if installed).A tick () indicates that the respective device is part ofthe system.Description This 16 character field will allow you to assigna label to the Extinguishment Module. For example,if the Extinguishment Module is intended for fire extinctionin a particular part of the premises, it may beuseful to assign the name of the area concerned. Theassigned label will identify the Extinguishment Modulein all the operations it is involved in.Setting up an Extinguishment Module:— select the Extinguishment Module on the left-handside of the page, then program the respective parameterson the right-hand side of the page, as follows.Figure 23 Extinguishment Modules pagePROGRAMMING FROM A PC 37
Page 1 and 2: CONVENTIONALFIRE PANELS424408INSTAL
Page 3 and 4: TABLE OF CONTENTSINTRODUCTION 5The
Page 5 and 6: INTRODUCTIONThe J424 and J208 Contr
Page 7 and 8: The Control panel will activate the
Page 9: IDENTIFICATION OF PARTSThe Status L
Page 12 and 13: NCNOC6 7 8 9 10 1131 3029Figure 2 M
Page 14 and 15: NCNOCDescription of PartsThis secti
Page 16 and 17: P. Description33 Anchor screw locat
Page 18 and 19: P. Description37 Battery output vol
Page 20 and 21: LED ON FaultElectrovalveGlowing ind
Page 22 and 23: 4. Using the Jumper (43), marked
Page 24 and 25: Display Module (for J424 and J400-R
Page 26 and 27: A IMQ-SECURITY SYSTEMS certificatio
Page 28 and 29: Extinguishment Module TerminalsEM S
Page 30 and 31: Standby statusOnly the green Mains
Page 32 and 33: Access Level 2Most of the functions
Page 34 and 35: EVENTS DETAILS DESCRIPTION24R OUT F
Page 36 and 37: Mains (GREEN) If OFF check for loca
Page 38 and 39: Wiring instructions for this featur
Page 40 and 41: Main boardRS48524VConnectto the ear
Page 42 and 43: Connecting a Power Supply!The power
Page 46 and 47: Activation ModeThis section will al
Page 48 and 49: OptionsThis section will allow you
Page 50 and 51: Day to Night Mode This field will a
Page 52 and 53: 44 Conventional Fire Panels J424/J4
Page 54 and 55: MMM 640 sec - - Zone 1Zone 5 Pre-al
Page 56 and 57: 4. Go back to step 1 to program ano
Page 58 and 59: Use the Increase Time option (Key 8
Page 60 and 61: TERM. DESCRIPTION v(V) i(A)[DL][OC]
Page 62 and 63: 54 Conventional Fire Panels J424/J4
Page 64: ®BENTEL SECURITY s.r.l.Zona Ind. S

CONVENTIONAL FIRE PANELS - Kotesa

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?