Otter Creek Township Zoning Ordinance - Mercer County Regional ...

Table 401 - Area and Height Dimensions (Continued)Area and Height Dimensions B-1 Zoning District I Zoning District**Minimum Lot Area *- Commercial Uses- Single-Family Dwelling- Industrial UsesMaximum Lot Area- Industrial UsesMinimum Lot Width- Interior Lot- Corner LotMinimum Front Yard Setback 2Accessory Farm StructuresMinimum Rear Yard Setback- Principal Structure- Accessory StructureMinimum Side Yard- Total of Both Sides- One Side- Principal Use- Interior Lot- Street Side on Corner Lot- Accessory Use- Interior Lot- Street Side on Corner LotMaximum Structure Height- Principal Structure- Accessory Structure30,000 sq. ft.37,500 sq. ft.N/AN/A100 ft. 1120 ft.100 ft.N/A35 ft.10 ft.12 ft.25 ft.12 ft.25 ft.30 ft.30 ft.N/AN/A80,000 sq. ft.4 Acres125 ft.150 ft.100 ft.50ft.35 ft.35 ft.12 ft.25 ft.12 ft.25 ft.35 ft. 335 ft.Maximum Lot Coverage 50% Commercial, 25%Residential50% Industrial, 25%Residential1 Minimum Lot Width for Residential Uses in a Business-Highway District shall be 150 ft.(Interior) 170 ft. (Corner Lot)2 Building Setback shall be measured from the street center line.3 Industrial equipment normal in industrial operations may reach greater heights than 35 ft. if approved by the Zoning HearingBoard.* The Department of Environmental Protection shall have approved the plan for adequate water supply and sanitary sewagefacilities.** For Residential Uses in a Industrial District, Area and Height Dimensions, for Residential shall be used.11