TE450 SM service manual.pdf - Hyosung

7-39 CHASSIS● Install the speedometer 1 .1● Install the handle switch box with the lug 2 on theswitch half inserted into the hole 3 on the handlebar.NOTEWhen installing the handlebar, make sure that thecable, wiring harness and brake hose routing areproper. (Refer to page 8-26 to 31)32● Install the clutch lever assembly to the handlebarwith the mating surface of clutch lever holderaligned with punch mark 4 on the handlebar.● Connect the clutch cable, rear brake cable andclutch switch.● Adjust each cable play.(Refer to page 2-9, 2-13 and 2-15)4● Install the throttle case to the handlebar with themating surface of throttle case aligned with thepunch mark 5 .● Tighten the throttle case bolts to the specifiedtorque.Throttle case bolt : 5 N∙m (0.5 kgf∙m)● Install the brake master cylinder.(Refer to page 7-20)5