TE450 SM service manual.pdf - Hyosung

7-65 CHASSIS◉ REMOUNTINGRemount the cushion lever, cushion rod andswingarm in reverse order of removal.Pay attention to the following points :● Install the swingarm and pivot shaft.● Tighten the swingarm pivot nut to the specifiedtorque.Swingarm pivot nut: 50~80 N∙m (5.0~8.0 kgf∙m)● Install the rear shock absorber and cushion lever.● Tighten the rear shock absorber mounting nuts tothe specified torque.Rear shock absorber nut (Upper) 1: 40~60 N∙m (4.0~6.0 kgf∙m)Rear shock absorber nut (Lower) 2: 40~60 N∙m (4.0~6.0 kgf∙m)12● Tighten the cushion rod nut and cushion lever nutto the specified torque.Cushion lever nut 3: 70~100 N∙m (7.0~10.0 kgf∙m)Cushion rod nut 4: 70~100 N∙m (7.0~10.0 kgf∙m)43