TE450 SM service manual.pdf - Hyosung

ENGINE 3-44ENGINE REASSEMBLYReassemble the engine in the reverse order of disassembly.Pay special attention to the following points :NOTEApply engine oil to each running and sliding part before reassembling the engine.◉ CRANKSHAFT● Determine the width between the webs referring tothe figure when rebuilding the crankshaft.Width betweenwebsStandard71.0±0.1 mm (2.795±0.004 in)● When mounting the crankshaft in the crankcase, itis necessary to pull its left end into the crankcaseby using the special tools.Crankshaft installer : 09910-3281271.0±0.1 mmCAUTIONNever fit the crankshaft into the crankcase bystriking it with a plastic hammer.Always use the special tool, otherwise the accuracyof the crankshaft alignment will be affected.