TE450 SM service manual.pdf - Hyosung

13-47 ENGINE◉ GEAR POSITION SWITCH● Install the springs 1 , contacts 2 and new O-ring3 .● Install the gear position switch and tighten thebolts to the specified torque.Gear position switch bolt: 6.5 N∙m (0.65 kgf∙m)3, 2◉ CAM CHAIN● Install the cam chain 4 onto the sprocket.● Tighten the cam chain tensioner mounting bolt 5to the specified torque.765Cam chain tensioner mounting bolt: 10 N∙m (1.0 kgf∙m)● Install the starter idle shaft 67 .and starter idle gear4◉ STARTER CLUTCH AND MAG-NETO ROTOR● Remove the grease from the tapered portion ofthe crankshaft and the magneto rotor.● Install the starter driven gear 8 and key 9 .89● Tighten the magneto rotor nut to the specifiedtorque using the special tool.Magneto rotor nut: 120 N∙m (12.0 kgf∙m)Conrod holder : 09910-20115