AS-700

Pos: 71 /Bedienungsanleitungen/Geräte spezifisch/Drucker/Troubleshooting (all printers)/8.2a_Ü3_The device cannot be turned on @ 3\mod_1280834344948_912.doc @ 24470 @ 3Pos: 72 /Bedienungsanleitungen/Geräte spezifisch/8.2b_Sicherungswechsel_250V 3.15A T_KG5101.008_Table Top Drucker @ 3\mod_1280833937069_912.doc @ 24458 @Pos: 73 /Bedienungsanleitungen/Geräte spezifisch/Drucker/Troubleshooting (all printers)/Printing/8.2.X_Ü3_Weak_printout_due_to_worng_ink_type_selected_ALL PRINTERS @ 2\mod_1276846566086_912.doc @ 18721 @ 38.2 Troubleshooting8.2.1 The device cannot be turned onCondition Problem SolutionThe device cannot be turnedon and gets no power.The power is cut or the fuseswere activated.Check the correct connectionof the power cable.Check the fuses of thedevice.Fuse exchangeAttention!Disconnect the device from the power outlet before exchanging thefuses.DataTypeDimensionsVoltageGlass tube microfuse5 x 20 mm250 V3.15 A (T)Figure 1: Exchange of the fusesAmount 1(one additional fuseincluded as spare)Use a flat screwdriver to take the fuse holder with the two smallmicrofuses out of the power input module. The inner fuse is in use,while the outer fuse is only a spare. Change the blown fuse and insertthe holder again.User Manual Version 3.1 101