AS-700

More documents

Recommendations

Info

Pos: 101.3 /Bedienungsanleitungen/Geräte spezifisch/Drucker/Printer Driver & Cables to PC/USB 2.0 (619)/7.X.X_Ü2_How to use a pre-installed printer driver_ONLY_619 @ 3\mod_1296652778190_912.doc @ 29931 @ 2333. Delete .inffiles• Open the folderC:\Windows\infPlease note: The location of the “Windows” folder might be differenton your PC.• Search for oem**.inf files containing (= in the file) the words“Flex Systems” or “Satori”.• Delete all oem**.inf files that were found containing these words.For example “oem36.inf”.140 User Manual Version 3.1
11.3 How to use a pre-installed printer driverIt is not recommended to continue to use an old version of the printerdriver. When setting up a new printer the printer driver, which isdelivered together with the printer, should be installed.11.3.1 USB connection1. Checkinstalledprinter driver2. Connect theprinter to thePC• Make sure that the already installed printer driver is the correctone for your new printer. For example the printer model <strong>AS</strong>-710requires the printer driver for the <strong>AS</strong>-710.• Connecting the printer to the PC via the USB cable. The PC willshow the following messages. See Figure 57 and Figure 58Figure 57: New hardware detected3. Identify theUSB portnumberFigure 58: Found New Hardware Wizard• Identify the USB port number as described in How to identify theUSB port used by the printer.4. Set the Portof the preinstalleddriver• Open “Devices and Printers” on your PC (START > Control Panel >Printer and Faxes).• Choose the pre-installed printer driver and click on with the rightmouse button.• Select “Properties” and select the tab “Ports”.• Select the matching USB port number.5. Test theconnection• Select the printer driver in the “Devices and Printers” window.• Unplug the USB cable. The status will change to “Offline”• Plug the USB cable in again. The status will change to “Ready”• Now the printer is ready to use together with this pre-installedUser Manual Version 3.1 141
Page 1 and 2:
As-700ADress PrINTerUser MANUAL
Page 4 and 5:
Table of Contents1 Introduction ...
Page 6 and 7:
Pos: 6 /[Allgemeines]/0.3_Abbildung
Page 8 and 9:
Pos: 7 /Bedienungsanleitungen/Gerä
Page 10 and 11:
Pos: 11 /Bedienungsanleitungen/Ger
Page 12 and 13:
Page 14 and 15:
Page 16 and 17:
Page 18 and 19:
Page 20 and 21:
3.4.2 How to mount the paper feed r
Page 22 and 23:
Page 24 and 25:
4.3.1 Key panelBelow is an explanat
Page 26 and 27:
Page 28 and 29:
Page 30 and 31:
Page 32 and 33:
Page 34 and 35:
separation fingersFigure 11: Separa
Page 36 and 37:
Page 38:
Page 41 and 42:
Page 44 and 45:
Pos: 61.3 /Bedienungsanleitungen/Ge
Page 46 and 47:
Page 48 and 49:
MAIN MENUThe Home key opens the mai
Page 50 and 51:
KEEP ALIVEHere you can turn on the
Page 52 and 53:
Pos: 61.26 /Bedienungsanleitungen/G
Page 54 and 55:
Page 56 and 57:
Page 58 and 59:
Page 60 and 61:
Page 62 and 63:
Page 64 and 65:
Page 66 and 67:
Page 68 and 69:
Page 70 and 71:
Page 72 and 73:
Pos: 61.102 /Bedienungsanleitungen/
Page 74 and 75:
Page 76 and 77:
Page 78 and 79:
Page 80 and 81:
Page 82 and 83:
Page 84 and 85:
3. Install thedriver with theNew Ha
Page 86 and 87:
Page 88 and 89:
7.3.1 Adding a TCP/IP port to a pri
Page 90 and 91: Pos: 62.6 /Bedienungsanleitungen/Ge
Page 92 and 93: 7.3.2.2 Using a dynamic IP address1
Page 94 and 95: 2. TCP/IPinterfaceconfigurationof t
Page 96 and 97: Pos: 64 /Bedienungsanleitungen/Ger
Page 112 and 113: Pos: 80.18 /Bedienungsanleitungen/G
Page 126 and 127: os: 85.6 /Bedienungsanleitungen/Ger
Page 132 and 133: Pos: 92 /Zubehör/Generelles Zubeh
Page 136 and 137: os: 99 /Bedienungsanleitungen/Gerä
Page 150 and 151: 11.8 How to create a print fileDepe
Page 152 and 153: Pos: 105 /Serviceanleitungen/Gerät
Page 154 and 155: 4 • Enable “Send to printer”
Page 160 and 161: 12 GlossaryTermAddressingASCllBarco
Page 162 and 163: Font inclinationFont typeHP TIJ 2.5
Page 164 and 165: Printer DriverPrintheadPrinthead ca
Page 166 and 167: 13 IndexAccessories ...............
Page 168: 9204022X-Bedition 08/04/2011 - 9204
show all

AS-700

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?