AS-700

Pos: 51 /Bedienungsanleitungen/Geräte spezifisch/Drucker/AS-710/5.2b_How to install the ink cartridge_Shuttle Head_Step 2 @ 2\mod_1270115344904_912.doc @ 14264 @Pos: 52 /Bedienungsanleitungen/Geräte spezifisch/Drucker/AS-710/5.3_How to setup the feeder_AS-700/710 @ 2\mod_1270546598066_912.doc @ 14284 @ 2Installing theink cartridgePlease put the cartridge into the mounting, by cautiously pushing itdownwards in a straight movement. Do not force or “turn in” thecartridge into its mounting by hand.The cartridge should be in a slightly inclined position. The restraininglever then tilts the cartridge into its final position.• Open the stop lever completely.• Take the ink cartridge out of the packaging and remove theprotection tape from the print nozzles.• Insert the ink cartridge with the print nozzles facing downwards -do not push in the direction of the restraining lever.• Lock the lever in direction of the arrow as shown in Figure 9. Thus,the ink cartridge is tilted into its final position, and the contact isestablished correctly.Handling ink cartridgesDo not touch the contacts or the nozzle plate of an ink cartridge. Thismay lead to reduced print quality.Ink cartridgesWe recommend to use only supported Neopost inks in connectionwith this printer. Refilled ink cartridges may result in bad printingquality and may damage the printer.Please see chapter 9.1 Consumables, on page 130 for applicable ink cartridges.Close thesafety cover• Close the transparent safety cover.• The printer will display:RESET INK LEVEL?Ok=YES Cancel=NO• If you inserted a new cartridge press the Ok key (YES).This will set the ink level to 100%.• If you re-inserted the same cartridge press the Cancel key(NO). The ink level will be left unchanged.• The printer will display:EMERGENCY RELEASEDPlease wait...• The installation of the ink cartridge is completed.32 User Manual Version 3.1