AS-700

Pos: 61.3 /Bedienungsanleitungen/Geräte spezifisch/Drucker/Menüpunkte Drucker/Quick Menü/Ü2_6001_PRINTER RESET_FW_4.8 @ 3\mod_1287746467437_912.doc @ 27909 @Pos: 61.4 /Bedienungsanleitungen/Geräte spezifisch/Drucker/Menüpunkte Drucker/Quick Menü/Ü2_6002_CLEAR PRINT QUEUE @ 0\mod_1254923958143_912.doc @ 5266 @QUICK MENUThe Quickkey opens the following menu:PRINTER RESETThe PRINTER RESET process is used when a print job needs to be cancelled. This processwill clear the PC's spooler by first accepting all print data being sent from the PC application,deleting them and then resetting the printer internal buffer.To perform a PRINTER RESET execute the following steps:• Select PRINTER RESET in the QUICK MENU and hit the Ok key.• CLEAR SPOOLER? Select and hit the Ok key.• Hit the Cancel key.• The orange Warning LED will blink until all print data is deleted from the spooler.While deleting the data, the following information are shown in the display:Data/sCurrent transfer rate in bytes per secondo Data/sAverage transfer rate in bytes per secondTotal DataTotal data transferred in bytesTime [ms]Total time elapsed in secondsIf your print job is large; pressing cancel from the software applicationmay shorten the time it takes to complete this task.• When the orange Warning LED stops blinking; check whether your PC application hassent all print data to the printer. For example check if the progress bar for this printjob reached 100%.• When the software application shows that all print data has been sent or the job hasbeen cancelled, hit the Cancel key on the printer.• The printer will now clear the printer buffer and go back to the QUICK MENU.Job cancel with PRINTER RESETPerforming a PRINTER RESET is a good way to securely cancel arunning print job. After performing a PRINTER RESET you can startwith a new print job.44 User Manual Version 3.1