AS-700

Pos: 61.42 /Bedienungsanleitungen/Geräte spezifisch/Drucker/Menüpunkte Drucker/Ü3/Ü4/Ü3_1701_SOFT FONT ERROR @ 0\mod_1254908138045_912.doc @ 4705 @Pos: 61.43 /Bedienungsanleitungen/Geräte spezifisch/Drucker/Menüpunkte Drucker/Ü3/Ü4/Ü3_1702_SET PAP. TOLERANCE_non LOG Geräte @ 0\mod_1254908137717_912.doc @ 4701 @Pos: 61.44 /Bedienungsanleitungen/Geräte spezifisch/Drucker/Menüpunkte Drucker/Ü3/Ü4/Ü3_1703_ERROR LOW INK @ 0\mod_1254908138248_912.doc @ 4709 @ERROR HANDLINGSelect ERROR HANDLING in the PRINTER CONFIG. menu and hit the Okpresented with the following choices:key. You will beSOFT FONT ERRORThis feature is used to set the printer response when it detects a PC font related error.Optioncont. printstop printDefault: stop printNoteIf a font error occurs, the machine will continueprinting. A warning message will be displayed.If a font error occurs, the printer will stop and reportthe failure.SET PAP.TOLERANCEUse this feature to set the tolerance of the measured paper length. The tolerance can bevaried in nine steps, from 8 mm up to 70 mm (0.31” up to 2.75”). If one sheet of paperexceeds this tolerance level, the printer will stop and display an error message.This value is important for detecting paper jams or double sheets inside the printer.Therefore the default value of 8 mm should only be increased if the media being used trulyvaries in length (e.g. magazines with inserts) or is made out of material that is difficult totransport (e.g. thick, heavy, rough-textured).When media of longer length is detected, the printer will stop and give the error PAPER JAMOR WRONG PAPER WIDTH! CODE: 028mm, 13mm, 18mm, 23mm, 28mm, 38mm, 48mm, 58mm, 70mm0.31”, 0.51”, 0,71“, 0.90”, 1.10”, 1.49”, 1.88”, 2.28”, 2.75”Default: 8mm / 0.31 inch58 User Manual Version 3.1