AS-700

Correct IP address syntaxDon’t enter the unnecessary “0” digits of the IP address in theproperties window. If the IP address is not entered correct, the PCcannot establish a connection to the printer.Example:NOT correct: 192.168.005.008Correct: 192.168.5.83. Checkcustomssettings• After the detection select “Custom” and click on “Settings…” (seeFigure 43).• Set the “Port number” to the same value as set in the printer.Then click on “OK”. Make sure the Protocol is set to “RAW” (SeeFigure 44. This figure only shows a sample IP address. Make sureto enter the IP address used in your installation).• Check the settings and click on “Finish”.Figure 43: Custom settingsFigure 44: Custom settings of printer port• Now this printer driver is ready to send data via the TCP/IP port.Make sure that the box at the new “Standard TCP/IP Port” ischecked (see Figure 45).• To use the Ethernet connection for printing, select this printerdriver in your software application.User Manual Version 3.1 89