AS-700

Pos: 62.4 /Bedienungsanleitungen/Geräte spezifisch/Drucker/Printer Driver & Cables to PC/TCP /IP (619)/7.X_Ü2_How to use the Ethernet interface_ONLY_619 @ 3\mod_1289307206814_912.doc @ 28147 @ 2Pos: 62.5 /Bedienungsanleitungen/Geräte spezifisch/Drucker/Printer Driver & Cables to PC/TCP /IP (619)/7.X.X_Ü3_Adding a TCP/IP port to a printer driver_ONLY_619 @ 3\mod_1295345335701_912.doc @ 29481 @ 37.2 How to use the USB interfaceStart the the printer driver installation firstPlease make sure to start the installation the printer driver before youconnect to the printer to the PC!See chapter 7.1 on page 84 for a description of how to install theprinter driver.Plug the USB cable into the USB interface of the printer.PC you may start to send print jobs to the printer.After turning on printer and7.3 How to use the Ethernet interfaceThe printer can either be connected directly to a PC via the Ethernet (TCP/IP) connection orthe printer can be connected to a local area network (LAN) using the Ethernet (TCP/IP)connection.• Please attach the “Splitting Ferrite with plastic case” (part number 9204150F) to theend of the Ethernet cable that goes into the printer. See Figure 39.Figure 39: Ferrite with plastic case• Please see chapter 7.3.2 on how to connect the printer to a network via the Ethernetconnection• Please see chapter 7.3.3 on how to connect printer directly to a PC via the EthernetconnectionUser Manual Version 3.1 87