AS-700

Pos: 105 /Serviceanleitungen/Geräte neutral/41_Ü3_Firmware update via USB port GRAPHIC DISPLAY & 619 ONLY @ 3\mod_1294834232529_912.doc @ 29242 @ 311.9 How to update the flashware11.9.1 How to update the flashwareThe flashware can only be updated via the USB port of theprinter. When starting the printer in the update mode, it willautomatically use the USB port.1. Before youbegin• Use the SETTING DUMP feature, located in the SERVICE menu, toprint out all current printer settings. You will need this informationlater.• Make sure that the correct printer driver is installed and that thedriver is working correctly when connecting the printer via USB.Install the printer driver firstPlease make sure to install the printer driver before you connect tothe printer to the PC. Make sure that the connection via the USB portis working correctly by printing sample pages before you attempt theflashware update.2. Preparation • Turn off the printer.• Connect the printer to an USB port of your PC.• Unpack the .zip file containing the flashware onto the hard disk ofyour PC.3. Put theprinter intothe updatemode• Press the Ok , the Arrow left (Run paper) and the Arrow Up(Test Print) keys together and hold them.• While holding these three keys turn the printer on.• On the display the message Waiting for Download appears.4. Send theflashware fileto the printer• Use the software tool PrintFile, as described below, to send theflashware to the printer.152 User Manual Version 3.1