AS-700

Pos: 62.7 /Bedienungsanleitungen/Geräte spezifisch/Drucker/Printer Driver & Cables to PC/TCP /IP (619)/7.X.X_Ü3_Direct ethernet connection between the printer and the PC_ONLY_619 @ 3\mod_1289307250494_912.doc @ 28152 @ 3HinweisHinweisFigure 46: DHCP Table on serverUsing the printer within a LANIt is necessary to assign one specific IP address to the printer within thenetwork. Since this one specific IP address needs to be entered in theconfiguration of the printer driver.Checking the printer’s network settingsYou can always check the printer’s current IP address, Port number,subnet mask, gateway and the MAC address in this printer menu:SERVICE > CONFIGURAT. INFOFigure 47: Test of fix IP (ping test on server)4. Configurenetworksettings (PC)and installprinter driver• It is not necessary to change any network settings on the PC usedto send data to the printer, given that the PC is working within thesame LAN as the printer.• Install and configure the printer driver for your printer model asdescribed in chapter 7.1 on page 84.7.3.3 Direct Ethernet connection between the printer and the PC1. Connect theprinter to thePC with anEthernet cable• Connect the printer to the PC with the Ethernet cable.Insert one Ethernet connector of the cable into the Ethernetinterface of the printer and insert the other connector into theinterface of your PC.User Manual Version 3.1 93