AS-700

Pos: 61.94 /Bedienungsanleitungen/Geräte spezifisch/Drucker/Menüpunkte Drucker/Ü3/Ü4/Ü3_3227_Test Continuous @ 0\mod_1254917241934_912.doc @ 5123 @Pos: 61.95 /Bedienungsanleitungen/Geräte spezifisch/Drucker/Menüpunkte Drucker/Ü3/Ü4/Ü3_3228_Roller Cleaning @ 0\mod_1254908128497_912.doc @ 4693 @Pos: 61.96 /Bedienungsanleitungen/Geräte spezifisch/Drucker/Menüpunkte Drucker/Ü3/Ü4/Ü3_3234a_Cartridge_Shuttlehead_AS-700/AS-710 @ 3\mod_1279784189938_912.doc @ 24063 @Pos: 61.97 /Bedienungsanleitungen/Geräte spezifisch/Drucker/Menüpunkte Drucker/Ü3/Ü4/Ü3_3235_Prewarming @ 1\mod_1255684370577_912.doc @ 6659 @Paper SensorThis feature is used to check the status of the paper sensor (top of form sensor).StatusSensor is freeSensor is not freeNoteThe sensor detects no material.The sensor detects material.Test ContinuousThe printer will move the cartridge carriage and the material transport continuously.Roller CleaningWhen activating this function, the feed roll of the printer will start to turn. The user canclean the roller, by carefully pressing a damp cloth against the rotating roll.AttentionDon’t let a piece of cloth get into the printer. Watch your hands!Read the description for Cleaning and Service in the user manual.CartridgeThis test checks the electronically connections between cartridge mounting and printhead.The results of the test are shown in the display.TestHP PEN IDMISSING DOTSNoteThe identification code of each PEN board (e. g 11 =(Unit U1), Cartridge C1).Number of missing dots of the cartridge, that can’t becontrolled by the printer.If all nozzles response correctly, the display will show“no”.Amount of missing dotsThe amount of missing dots (MISSING DOTS) can be an evidence, thatthe connection between printhead and cartridge mounting isinterfered.If the amount of missing dots is a multiple of seven (14, 21, 28, ...),the problem lies most likely in a draggled printhead contacting.In this case, clean the contacts of the printhead and that of thecartridge mounting with a piece of cloth, an repeat the test.70 User Manual Version 3.1