AS-700

11.3 How to use a pre-installed printer driverIt is not recommended to continue to use an old version of the printerdriver. When setting up a new printer the printer driver, which isdelivered together with the printer, should be installed.11.3.1 USB connection1. Checkinstalledprinter driver2. Connect theprinter to thePC• Make sure that the already installed printer driver is the correctone for your new printer. For example the printer model AS-710requires the printer driver for the AS-710.• Connecting the printer to the PC via the USB cable. The PC willshow the following messages. See Figure 57 and Figure 58Figure 57: New hardware detected3. Identify theUSB portnumberFigure 58: Found New Hardware Wizard• Identify the USB port number as described in How to identify theUSB port used by the printer.4. Set the Portof the preinstalleddriver• Open “Devices and Printers” on your PC (START > Control Panel >Printer and Faxes).• Choose the pre-installed printer driver and click on with the rightmouse button.• Select “Properties” and select the tab “Ports”.• Select the matching USB port number.5. Test theconnection• Select the printer driver in the “Devices and Printers” window.• Unplug the USB cable. The status will change to “Offline”• Plug the USB cable in again. The status will change to “Ready”• Now the printer is ready to use together with this pre-installedUser Manual Version 3.1 141