AS-700

Pos: 61.53 /Bedienungsanleitungen/Geräte spezifisch/Drucker/Menüpunkte Drucker/Menü_Drucker_Hinweis_Nicht "Lock"-bar @ 0\mod_1254823525509_912.doc @ 4313 @Pos: 61.54 /Bedienungsanleitungen/Geräte spezifisch/Drucker/Menüpunkte Drucker/Ü3/Ü4/Ü3_2207_SHUTTLE SPEED @ 0\mod_1254914556034_912.doc @ 4951 @Pos: 61.55 /Bedienungsanleitungen/Geräte spezifisch/Drucker/Menüpunkte Drucker/Menü_Drucker_Hinweis_Locking the SHUTTLE SPEED @ 2\mod_1271144455684_912.doc @ 14507 @Pos: 61.56 /Bedienungsanleitungen/Geräte spezifisch/Drucker/Menüpunkte Drucker/Ü3/Ü4/Ü3_2208_PRINTMODE @ 0\mod_1254914555706_912.doc @ 4947 @TRANSPORT PARAM.Pos: 61.52 /Bedienungsanleitungen/Geräte spezifisch/Drucker/Menüpunkte Drucker/Ü3/Ü4/Ü3_2201_PAPER SPEED_Only_AS-700/710 @ 0\mod_1254914049061_912.doc @ 4879 @PAPER SPEEDThis feature is used to set how fast the product is transported forward in the printer. Choosea lower setting for very thick or very sensitive products.30%, 40%, 50%, 60%, 70%, 80%, 90%, 100%Default: 100%When using a software application that was designed to control thisfeature (e. g. Flexmail, BulkMailer), this configuration will beoverwritten with the settings of the software.In this case use the software options to configure the printer.SHUTTLE SPEEDThis feature is used to set the speed of the cartridge carriage (shuttle). Choose a lowershuttle speed setting, if a very precise alignment of the printed image is required. Note thatthe speed of the shuttle determines the level of print quality you can set. See table below.Option1315 mm/s 258.7 ft./min1052 mm/s 207.0 ft./min789 mm/s 155.2 ft./min526 mm/s 103.5 ft./min263 mm/s 51.7 ft./minPossible print quality (dpi)1x3, 1x6, 2x3, 2x61x3, 1x6, 2x3, 2x6, 3x3, 3x61x3, 1x6, 2x3, 2x6, 3x3, 3x61x3, 1x6, 2x3, 2x6, 3x3, 3x6, 6x3, 6x61x3, 1x6, 2x3, 2x6, 3x3, 3x6, 6x3, 6x6Default: 1315 mm/s258.7 ft./minLocking the shuttle speedLocking the shuttle speed is possible with firmware version 4.7 orhigher.62 User Manual Version 3.1