AS-700

Pos: 54 /Bedienungsanleitungen/Geräte spezifisch/Drucker/AS-710/5.5_Ü2_Length Measurement of the Print Media_AS-700/710 @ 2\mod_1270557639681_912.doc @ 14311 @ 2Pos: 55 /Bedienungsanleitungen/Geräte spezifisch/Drucker/5.7_Ü2_How to set the print direction @ 1\mod_1260881170148_912.doc @ 8511 @ 2thickness adjustmentknobtransport rollermoveable exit rollerFigure 17: Adjusting the printer to the material thickness5.5 Length measurement of the mediumThe printer permanently controls the size of the fed media. Therefore the Neopost AS-700needs to know the dimension of the medium at the beginning of a new print job. Thedimension can either be measured manually or be sent by a PC software. The dimensionvalues are stored in the printer as reference values, until new dimensions are measured.PC softwareSending the correct media dimensions to the printer, is only availablein PC software designed to work together with this Neopost printer.When you are using a PC software that is able to send the dimension data, you do not needto measure the paper size manually.• Manually measure the media dimensionPut one medium into the feeder and proceed as described in chapter 4.3.1• Key panel, on page 23.• Set the paper dimension in PC softwarePlease refer to the manual of your PC software.38 User Manual Version 3.1