AS-700

Pos: 80.4 /Bedienungsanleitungen/Geräte spezifisch/Drucker/Error Messages/04_ERROR_PAPER_SENSOR @ 2\mod_1265617418639_912.doc @ 11281 @Pos: 80.5 /Bedienungsanleitungen/Geräte spezifisch/Drucker/Error Messages/05_Increase_The_Gap! @ 2\mod_1265617469330_912.doc @ 11284 @ProtocolcodeDisplay messageCause003 PAPER TOO SMALL OR WRONGPAPER LENGTH!CODE: 03Elimination • Measure actual paper size• Compare paper size intransport direction with sizeset in printer• Compare paper size in PCsoftware with size set inprinter• Check if a wrong paper size islocked• When using material with nonrectangularedges or withpress cut sections turn off thePAPER SENSOR in the menu• Attach a holding-down devicewhen using uneven materials(e.g. foil-wrapped magazines)• Adjust/teach-in paper sensor• Check paper sensor inHARDWARE TESTExpected paper size too smallFixed Head Printer with oneprint unit:• If your material is preprintedon the reverse sideset the PAPER SENSOR to Offand blank colourpaper.Fixed Head Printer with morethan one print unit:• Clean the reflector of thepaper sensor• Check that the reflector isaligned parallel to the papersensor• Check if the reflector isdamagedPrinter with separate feeder:• Check if paper gets stuck onany machine parts• Check if the paper enters theprinter parallel aligned• Check paper sensor cable• Check if the belt(s) is runningin the correct positionProtocolcodeDisplay messageCause004 ERROR PAPER SENSOR CHECKTHE SENSOR!Unexpected paper sensor signalCODE: 04Elimination • Clean the paper sensor• Clean the reflector• Adjust/teach-in paper sensor• Check paper sensor inHARDWARE TEST• Call service108 User Manual Version 3.1