User manual - ICP DAS USA

• AnalogInFsr_8KDescription:This function is used to obtain input value in “FSR” form I-8000 analog input seriesmodules. The “FSR” means “Percent” format.Syntax:[ C ]WORD AnalogInFsr_8K(DWORD dwBuf[], float fBuf[],char szSend[],char szReceive[])Parameter:dwBuf: DWORD Input/Output argument talbedwBuf[0] : [Input] COM port number, from 1 to 255dwBuf[1] : [Input] Module address, form 0x00 to 0xFFdwBuf[2] : [Input] Module ID, 0x8017dwBuf[3] : [Input] 0= Checksum disable; 1= Checksum enabledwBuf[4] : [Input] Timeout setting , normal=100 mseconddwBuf[5] : : [Input] Channel number of analog input moduledwBuf[6] : [Input] 0 no save to szSend &szReceive1 Save to szSend &szReceivedwBuf[7] : [Input] Slot number.fBuf : Float input/Output argument table.fBuf[0] : [Output] The analog input value.szSend : [Input] Command string to be sent to I-8000 series modules.szReceive : [Output] Result string receiving from I-8000 series modules.Return Value:0 is for SuccessNot 0 is for FailureExample:float AI;float fBuf[12];char szSend[80];char szReceive[80];DWORD dwBuf[12];DWORD m_port=3;DWORD m_address=1;LinPAC-8x4x SDK:156