User manual - ICP DAS USA

STEP 3 :( Telnet to the LinPAC-8000 and execute program)(1) Open a “ DOS Command Prompt ” and then type in the telnet IPAddress of theLinPAC-8000 ( Example:telnet 192.168.0.200 ) to connect to the telnet server of theLinPAC-8000. Then type the User_Name and Password ( “ root ” is the defaultvalue. ). If it shows the “ # “ prompt character, the process of connecting from your PCto the telnet server of the LinPAC-8000 is finished. (refer to Fig.5-10)Fig.5-10(2) Type in the “ls -l“ command in order to list all the files in /root and to see thehelloworld.exe file. Then type in the “chmod 777 helloworld.exe” command tochange the authority of helloworld.exe and then type in the “ls -l“ command again tosee “helloworld.exe”. This means that the file is executable. Type in“./helloworld.exe“ to execute the file and it will show “ Welcome to LinPAC-8000 ”.Then all the steps from compile、 transfer to telnet to execute program will becompleted. (refer to Fig.5-11)Fig.5-11LinPAC-8x4x SDK:34