User manual - ICP DAS USA

6.4.2 For I-7000/I-8000/I-87000 modules via serial port6.4.2.1 I-7000 series modules• DigitalOutDescription:This function is used to output the value of the digital output module for I-7000 seriesmodules.Syntax:[ C ]WORD DigitalOut(WORD wBuf[], float fBuf[], char szSend[], char szReceive[])Parameter:wBuf: WORD Input/Output argument talbewBuf[0] : [Input] COM port number, from 1 to 255wBuf[1] : [Input] Module address, form 0x00 to 0xFFwBuf[2] : [Input] Module ID, 0x7011/12/14/42/43/44/50/60/63/65/66/67/80wBuf[3] : [Input] 0= Checksum disable; 1= Checksum enablewBuf[4] : [Input] Timeout setting , normal=100 msecondwBuf[5] : : [Input] 16-bit digital output datawBuf[6] : [Input] 0 no save to szSend &szReceive1 Save to szSend &szReceivefBuf : Not used.szSend : [Input] Command string to be sent to I-7000 series modules.szReceive : [Output] Result string receiving from I-7000 series modules .Return Value:0 is for SuccessNot 0 is for FailureExample:char szSend[80];char szReceive[80];float fBuf[12];WORD wBuf[12];WORD m_port=3;WORD m_address=1;LinPAC-8x4x SDK:85