User manual - ICP DAS USA

4.1.2 Setting of DNSBoot up LinPAC-8000 and click the “ start/xterm ” to open a “command line”. Type in“ vi /etc/resolv.conf ” to open the DNS setting file. Type “ DNS server ” in the“ nameserver ” field. Then type “ :wq ” to save the setting. Type “ reboot ” to reboot theLinPAC-8000 to make the setting work. ( Refer to the Fig 4-4 )Fig 4-44.2 microSD Card UsageUsers can access the files of microSD card in the /mnt/hda directory (Refer to Fig 4-5).Fig 4-5When using the microSD card, pay attention to the following notes:1. Umount the microSD card before unplugging it.2. Please do not power off or reboot the LP-8x4x while data is being written to or readfrom the microSD card.3. The microSD memory must be formatted in the VFAT/EXT2/EXT3 file system.4.2.1 Mount microSD CardIf want to use the microSD card, you can insert the microSD card into the socket in theLinPAC-8000 (Refer to Fig. 1-3). It will be auto-mounted in the LinPAC-8000 at boot time,and you can access the files of SD card in the /mnt/hda directory.If not, type in “/etc/init.d/sd start ”, user can mount microSD card by manual.LinPAC-8x4x SDK:16