User manual - ICP DAS USA

10.2.2 Enabling X-window load at boot timeIf you type the “ ls -al /etc/rc2.d “ that can fine the link about ../init.d/startx, and thentype the “ mv xS98Xserver S98Xserver “ to rename the xS98Xserver for turn on X-windowor else if you can’t fine any link about ../init.d/startx, and please follow the below steps :(1) Type “ cd /etc/rc2.d “ to into default run level.(2) Type ” ln -s ../init.d/startx /etc/rc2.d/S98Xserver “ to make a symbolic linkinto the script file of X-window for turn on X-window. Then exit and rebootLinPAC-8x4x.10.3 ScreenShot SupportThere is a screenshot program - “ fbshot ” built in to let users to catch theLinPAC-8000 screen conveniently. Users just type in “ fbshot -d /dev/fb0/mnt/hda/catch1.png ” and the screen will be catched and saved to the file -/mnt/hda/catch1.png. If users want to take a look the picture, just type in “ vi/mnt/hda/catch1.png”. ( Note : vi is placed in the path : /mnt/hda/opt/bin so users need toplug SD card in the LinPAC first. ) If users want to know the detailed parameters of fbshot,just type in “ fbshot --help ”. (Refer to the Fig. 10-9)Fig. 10-9LinPAC-8x4x SDK:286