Getting Started with vFabric Hyperic v.5.7 - VMware

More documents

Recommendations

Info

Thick Provision Eager Zeroed — A type of thick virtual disk that supports clusteringfeatures such as Fault Tolerance. Space required for the virtual disk is allocated atcreation time. In contrast to the flat format, the data remaining on the physical deviceis zeroed out when the virtual disk is created. It might take much longer to createdisks in this format than to create other types of disks.Thin Provision — Use this format to save storage space. For the thin disk, youprovision as much datastore space as the disk would require based on the value thatyou enter for the disk size. However, the thin disk starts small and at first, uses onlyas much datastore space as the disk needs for its initial operations. f the thin diskneeds more space later, it can grow to its maximum capacity and occupy the entiredatastore space provisioned to it. Also, you can manually convert the thin disk into athick disk.10. On the "Network Mapping" page, select a network by right-clicking the DestinationNetwork column in your infrastructure to set up the network mapping.11. On the "IP Address Allocation" page, you can choose one of:o Fixed — May be preferable for production environments. You will be prompted toenter the IP addresses in the Appliance Properties page.o Transient — IP addresses are allocated from a specified range when theappliance is powered on. The IP addresses are released when the appliance ispowered off.o DHCP — A DHCP server is used to allocate the IP addresses12. On the "Properties" page, enter values in the following fields and click Next to proceed:o DB usernameo DB passwordo vFabric Hyperic admin usernameo vFabric Hyperic admin password13. On the "Ready to Complete" page:a. Review the options you have selected on the "Ready to Complete" page.b. If you want the vFabric Hyperic Server started when deployment is complete, checkthe Power on after deployment box.c. Click Finish to proceed.The Deploying vFabric Hyperic page appears.Logon to vAppUse root user to logon to the vApp machines — both vFabric Hyperic Server and vFabricHyperic database. Supply the password that was defined during deployment for the vFabricHyperic Server admin account, hqadmin by default.Start and Stop vFabric Hyperic ServerUse the "hyperic" user to start, stop, and restart the vFabric Hyperic Server.36
vFabric Hyperic Server vApp Administration ConsoleThis page provides instructions for using the web-based management console for administrationof the vFabric Hyperic Server vApp.About the vApp Management ConsoleThe vFabric Hyperic Server vApp provides a web interface for performing common serveradministration tasks. The vApp console is available only when the vApp is powered on. Thefunctions provided by the vApp console can also be performed from a command shell.Connect to vFabric Hyperic Server vApp Management ConsoleConnect to the vFabric Hyperic Server vApp management console at this URL:https://host:5480where host is the IP address or DNS name of the vFabric Hyperic Server vApp host.Log on to the management console as root, and supply the password that was defined duringdeployment for the vFabric Hyperic Server admin account, hqadmin by default.View vFabric Hyperic Server vApp System InformationThe System > Information page presents the following information about the vApp:VendorAppliance NameAppliance VersionHostnameOS NameTwo command buttons appear in the Actions section:Reboot — This command restarts the vApp.Shutdown — This command powers down the vApp.Set vFabric Hyperic Server vApp Time zoneThe System > Time Zone page allows you to set the time zone.View vFabric Hyperic Server vApp Network StatusThe Network > Status page presents the following network details for the vApp:HostnameIPv4 GatewayPreferred DNS ServerAlternate DNS Server37
Page 1 and 2: Getting Started with vFabricHyperic
Page 3 and 4: ContentsAbout Getting Started with
Page 5 and 6: About Getting Started with vFabric
Page 7 and 8: Key Facts for vFabric Hyperic Insta
Page 9 and 10: About SSL in vFabric HypericAbout t
Page 11 and 12: By default, the vFabric Hyperic Ser
Page 13 and 14: You can also ensure that you do not
Page 15 and 16: o The vFabric Hyperic Server saves
Page 17 and 18: Unidirectional Communication via a
Page 19 and 20: Propertyserver.java.optstomcat.maxt
Page 21 and 22: vFabric Hyperic Installation and St
Page 23 and 24: 3. Start the vFabric Hyperic Server
Page 25 and 26: d. Open firewall port if necessary.
Page 27 and 28: 6. Import discovered resources.o Af
Page 29 and 30: Step-by-Step ProceduresSelect and D
Page 31 and 32: About vFabric Hyperic JREsBoth vFab
Page 33 and 34: Password Requirement for vFabric Hy
Page 35: About the vFabric Hyperic vAppA vir
Page 39 and 40: Prerequisites and RequirementsThese
Page 41: 5. Click the Custom Properties tab.
Page 44 and 45: checkpoint_segments — Set the val
Page 46 and 47: Stop PostgreSQLStop PostgreSQL with
Page 48 and 49: o On Windows platforms, enter:PathT
Page 50 and 51: 17. What port should HQ's built-in
Page 52 and 53: 3. On the Administrator User Inform
Page 54 and 55: After installing the agent, proceed
Page 56 and 57: 3. Entering the following command i
Page 58 and 59: Install vFabric Hyperic Server:1. O
Page 60 and 61: For information and required and op
Page 62 and 63: About vFabric Hyperic Agent RPMThe
Page 64 and 65: o On Windows platforms, install the
Page 66 and 67: Set Up Agent in Properties FileAbou
Page 68 and 69: About Password EncryptionThe first
Page 70 and 71: About Where the Agent Finds Server
Page 72 and 73: agent.setup.camPortDescriptionYou c
Page 74 and 75: agent.setup.agentIPDescriptionThis
Page 76 and 77: agent.keystore.pathDescriptionThis
Page 78 and 79: About unidirectional communicationI
Page 80 and 81: If the properties file does not alr
Page 82 and 83: Two-Step Migration ProcedureIn this
Page 84 and 85: One-Step Migration ProcedureNote: I
Page 86 and 87:
Command Required Optionalhq-exporth
Page 88 and 89:
Argument Description Default Behavi
Page 90 and 91:
Parameter Description DefaultqueryT
Page 92 and 93:
hq-install.log — this file contai
Page 94 and 95:
Create a Custom Agent Upgrade Bundl
Page 96 and 97:
The installer installs a new versio
Page 98 and 99:
Change vFabric Hyperic Server Sizin
Page 100 and 101:
Changing from Unidirectional to Bid
Page 102 and 103:
Configure vCenter Operations Manage
Page 104 and 105:
Depending on your environment, you
Page 106 and 107:
For example:$ telnet 192.168.1.114
Page 108 and 109:
To resolve this problem, you must r
Page 110 and 111:
Java Service Wrapper TimeoutUnder h
Page 112 and 113:
Overloaded BackendIf the vFabric Hy
show all

Getting Started with vFabric Hyperic v.5.7 - VMware

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?