Getting Started with vFabric Hyperic v.5.7 - VMware

agent.setup.camLoginDescriptionYou can use this property to define for the vFabric Hyperic Agent, at first startup afterinstallation, the vFabric Hyperic username to use when registering itself with the server.The permission required on the server for this initialization is Create, for Platforms.A login from the agent to the server is only required during the initial configuration of theagent.The agent reads this value only in the event that it cannot find connection configuration inits data directory. Specifying this and other agent.setup.* properties is a way toreduce the user interaction required to configure an agent to communicate with the server.DefaultCommented out, hqadmin.agent.setup.camPwordDescriptionYou can use this property to define the password that the vFabric Hyperic Agent will usewhen connecting to the vFabric Hyperic Server, so that the agent will not prompt for theuser to supply the password interactively at first startup. (This is the password for the userspecified by agent.setup.camLogin.The agent reads this value only in the event that it cannot find connection configuration inits /data directory. Specifying this and other agent.setup.* properties is a way toreduce the user interaction required to configure an agent to communicate with the server.Starting in Hyper 4.6.6, the first time you start the vFabric Hyperic Agent after installation, ifagent.keystore.password is uncommented and has a plain text value, the agent willautomatically encrypt the property value. If you prefer, you can encrypt these (and other, ifdesired) property values yourself prior to starting the agent. For more information, seeEncrypt Agent Property Value.DefaultCommented out, hqadmin73