Alibre Design

Chapter 7 - Feature Creation• Flat Angle: The distance (in degrees) the coil extends after transition with no pitch (flat).Provides transition from the end of the revolved coil to a flattened end. The example showsthe same coil as the Transition angle shown above, but with a half-turn (180 degree) flatangle specified.13. Specify a Parallel or Normal Profile Orientation condition.14. Click OK to create the helical feature.Helical Cut Feature Helical Boss Feature7.8 FilletFillet features create a rounded face on a part. You can place a fillet on individual edges, edgeloops, and all edges of a face. You can create a constant radius fillet or a variable radius fillet.7.8.1 Constant Radius FilletsConstant radius fillets create a rounded face of constant radius on an edge.‣ To create a constant radius fillet:169