Alibre Design

Chapter 12 - Drawings2. Move the cursor over the section line annotation. The annotation is highlighted and the cursorchanges.3. Click and drag the line to the desired location.4. Release the mouse button to place the line. The section view updates automatically based onthe new section line location.‣ To change the direction of the section view:1. Right-click the section view in the work area and select Reverse Section View from the pop-upmenu.OrRight-click the section view in the Drawing Explorer and select Reverse Section View from thepop-up menu.2. The section line is flipped and the section view is displayed from the opposite direction.‣ To change the hatch pattern for all parts in the section view:1. Right-click the section view in the work area and select Change Cross Hatch from the pop-upmenu; or right-click the section view in the Drawing Explorer and select Change Cross Hatchfrom the pop-up menu. The Hatch Properties dialog appears.2. Select a new cross hatch pattern from the Pattern pull down menu.3. Specify the cross hatch Scale.359