Alibre Design

Chapter 12 - Drawings2. Follow the steps outlined in sections 11.1.2 and 11.1.3 to specify the information included in thenew sheet. After inserting a new sheet into the drawing, the sheet will be listed in the DrawingExplorer under the Sheets node.3. The new sheet will initially be blank. Refer to section 11.5 for information related to insertingviews.4. To switch between sheets, select a sheet in the Drawing Explorer to view it.5. To delete a sheet, right-click the sheet in the Drawing Explorer and select Delete from the popupmenu.12.3.15 Moving a View to Another SheetYou can move a view to another sheet in a drawing.‣ To move a view to another sheet:1. Right-click the view in the work area or Drawing Explorer and select Move from the pop-upmenu. The Select Target Sheet dialog box appears listing the drawing sheets you can movethe view to.2. Select the sheet you want to move the view to.3. Click OK. The view is moved to the specified sheet and is listed under the target sheet in theDrawing Explorer.12.3.16 Hiding Parts in a View (Assemblies Only)In a drawing of an assembly, you can hide parts in a view.‣ To hide a part in a view:342