Alibre Design

More documents

Recommendations

Info

Chapter 7 - Feature Creation7.14 Copying Existing FeaturesAfter features have been created, they can be mirrored or patterned to easily create copies.7.14.1 Mirror FeatureMirror feature creates a copy of a feature mirrored about a reference plane or planar face. If theoriginal feature changes, the mirrored copy will automatically change as well.‣ To mirror a feature:1. From the Feature menu select Mirror. The Feature Mirror dialog box appears.2. Select the Features to mirror from the work area or the <strong>Design</strong> Explorer.3. Select the Mirror plane. You can use a reference plane or planar face.4. Check the Mirror Geometry box if you want to mirror the geometry exactly. You will normallybe concerned with this option when you are mirroring a feature that has been created usingreferences to existing geometry such as “extrude to geometry”. Below are two models. Thefirst shows a mirror created with the Mirror Geometry box unchecked, and the second with thebox checked.180
Chapter 7 - Feature Creation5. Click OK to create the mirror.7.14.2 Feature PatternsFeature patterns create copies of a feature by repeating it in a linear or circular array.Linear PatternsYou can use a linear pattern to repeat a feature in one or two linear directions.181
Page 1 and 2:
Alibre DesignUser Guide9.2
Page 6 and 7:
6.1.4 Parallel Plane Through a Poin
Page 8 and 9:
Working with Parts.................
Page 10 and 11:
11.9.2 Editing a Part in an Assembl
Page 12 and 13:
13.4.11 Modifying the BOM View Styl
Page 14 and 15:
Team Design Sessions ..............
Page 17:
Chapter 1 - InstallationC HAPTER 1I
Page 20 and 21:
Chapter 1 - InstallationAdditional
Page 22 and 23:
Chapter 1 - Installation3. Click In
Page 24 and 25:
Chapter 1 - InstallationWhen you se
Page 27 and 28:
Chapter 2 - Getting Started With Al
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
Page 45:
Page 48 and 49:
Chapter 3 - Introduction to the Des
Page 50 and 51:
Page 52 and 53:
Page 54 and 55:
Page 56 and 57:
Page 58 and 59:
Page 60 and 61:
Page 62 and 63:
Page 64 and 65:
Page 66 and 67:
Chapter 4 - Sketching4.1 The Sketch
Page 68 and 69:
Chapter 4 - SketchingRight-click in
Page 70 and 71:
Chapter 4 - Sketching4. Release the
Page 72 and 73:
Chapter 4 - Sketching1. Select the
Page 74 and 75:
Chapter 4 - Sketching3. Hold the Sh
Page 76 and 77:
Chapter 4 - Sketching4. Move the mo
Page 78 and 79:
Chapter 4 - SketchingTrimming and e
Page 80 and 81:
Chapter 4 - Sketching4.3.7 Elliptic
Page 82 and 83:
Chapter 4 - SketchingEach sketch sh
Page 84 and 85:
Chapter 4 - SketchingStandard Sketc
Page 86 and 87:
Chapter 4 - SketchingCheck the box
Page 88 and 89:
Chapter 4 - Sketching• Pitch alon
Page 90 and 91:
Chapter 4 - SketchingThe Shape dial
Page 92 and 93:
Chapter 4 - Sketching‣ To edit a
Page 94 and 95:
Chapter 4 - Sketching4.5.3 Adding F
Page 96 and 97:
Chapter 4 - Sketching2. Select the
Page 98 and 99:
Chapter 4 - Sketching‣ To create
Page 100 and 101:
Chapter 4 - Sketching2. Click the F
Page 102 and 103:
Chapter 4 - Sketching4.6.1 Constrai
Page 104 and 105:
Chapter 4 - Sketching2. Position th
Page 106 and 107:
Chapter 4 - SketchingStatus of enti
Page 108 and 109:
Chapter 4 - Sketching4. After the d
Page 110 and 111:
Chapter 4 - Sketching3. Dimensions
Page 112 and 113:
Chapter 4 - Sketching1. From the Fi
Page 114 and 115:
Chapter 4 - SketchingFunctions avai
Page 116 and 117:
Chapter 4 - Sketching4.7.7 Modifyin
Page 118 and 119:
Chapter 4 - SketchingThe grid acts
Page 120 and 121:
Chapter 4 - Sketching4.8.3 Cursor D
Page 122 and 123:
Chapter 4 - Sketching3. Select eith
Page 124 and 125:
Chapter 4 - Sketching5. Click the A
Page 126 and 127:
Chapter 4 - Sketching2. Make the ap
Page 128 and 129:
Chapter 5 - 3D Sketching5.1 The 3D
Page 130 and 131:
Chapter 5 - 3D Sketching5.1.2 Curre
Page 132 and 133:
Chapter 5 - 3D SketchingNotes:This
Page 134 and 135:
Chapter 5 - 3D Sketching‣ To cont
Page 136 and 137:
Chapter 5 - 3D Sketching3. Click a
Page 138 and 139:
Chapter 5 - 3D SketchingEditing a S
Page 140 and 141:
Chapter 5 - 3D Sketching3. Select t
Page 142 and 143:
Chapter 5 - 3D Sketching4. After th
Page 144 and 145:
Chapter 5 - 3D Sketching5.7.2 Expli
Page 147 and 148: Chapter 6 - Reference GeometryC HAP
Page 149 and 150: Chapter 6 - Reference Geometry4. Cl
Page 151 and 152: Chapter 6 - Reference Geometry6.1.4
Page 153 and 154: Chapter 6 - Reference Geometry6.2 A
Page 155 and 156: Chapter 6 - Reference Geometry‣ T
Page 159 and 160: Chapter 6 - Reference GeometryThe s
Page 163: Chapter 6 - Reference Geometry6.6 R
Page 166 and 167: Chapter 7 - Feature Creation7.1 The
Page 168 and 169: Chapter 7 - Feature CreationCutCut
Page 170 and 171: Chapter 7 - Feature CreationTo Geom
Page 172 and 173: Chapter 7 - Feature Creation‣ To
Page 174 and 175: Chapter 7 - Feature Creation2. Make
Page 176 and 177: Chapter 7 - Feature Creation7.5 Lof
Page 178 and 179: Chapter 7 - Feature Creation7. If d
Page 180 and 181: Chapter 7 - Feature CreationLoft Us
Page 182 and 183: Chapter 7 - Feature CreationFigure
Page 184 and 185: Chapter 7 - Feature Creation10. To
Page 186 and 187: Chapter 7 - Feature Creation7. Sele
Page 190 and 191: Chapter 7 - Feature Creation7.9 Cha
Page 192 and 193: Chapter 7 - Feature Creation4. Clic
Page 196 and 197: Chapter 7 - Feature Creation7.13 Ca
Page 200 and 201: Chapter 7 - Feature Creation‣ To
Page 204 and 205: Chapter 7 - Feature Creation• Boo
Page 206 and 207: Chapter 7 - Feature Creation2. In S
Page 208 and 209: Chapter 8 - Sheet Metal Feature Cre
Page 224 and 225: Chapter 9 - Working with Parts9.1 S
Page 226 and 227: Chapter 9 - Working with Parts2. To
Page 228 and 229: Chapter 9 - Working with PartsThe f
Page 230 and 231: Chapter 9 - Working with PartsThe F
Page 232 and 233: Chapter 9 - Working with PartsNote:
Page 234 and 235: Chapter 9 - Working with Parts6. Cl
Page 236 and 237: Chapter 9 - Working with Parts9.9 U
Page 238 and 239: Chapter 9 - Working with Parts9.10.
Page 240 and 241: Chapter 9 - Working with Parts9.10.
Page 242 and 243: Chapter 9 - Working with Parts13. C
Page 244 and 245: Chapter 9 - Working with PartsClick
Page 246 and 247: Chapter 9 - Working with Parts5. Cl
Page 248 and 249:
Chapter 9 - Working with Parts11. C
Page 250 and 251:
Page 252 and 253:
Page 254 and 255:
Chapter 9 - Working with Parts9.11.
Page 256 and 257:
Chapter 9 - Working with PartsTempl
Page 258 and 259:
Chapter 9 - Working with Parts9.11.
Page 260 and 261:
Chapter 9 - Working with Parts• M
Page 262 and 263:
Chapter 9 - Working with Parts- OR-
Page 264 and 265:
Chapter 10 - Design Configurations1
Page 266 and 267:
Chapter 10 - Design ConfigurationsR
Page 268 and 269:
Page 270 and 271:
Chapter 10 - Design ConfigurationsT
Page 272 and 273:
Page 274 and 275:
Chapter 10 - Design ConfigurationsT
Page 276 and 277:
Chapter 10 - Design ConfigurationsC
Page 278 and 279:
Page 280 and 281:
Chapter 10 - Design ConfigurationsI
Page 282 and 283:
Chapter 10 - Design Configurations
Page 284 and 285:
Chapter 10 - Design ConfigurationsE
Page 286 and 287:
Chapter 10 - Design ConfigurationsS
Page 288 and 289:
Chapter 10 - Design Configurations
Page 291 and 292:
Chapter 11 - Assembly DesignC HAPTE
Page 293 and 294:
Chapter 11 - Assembly DesignAssembl
Page 295 and 296:
Chapter 11 - Assembly DesignYou can
Page 297 and 298:
Chapter 11 - Assembly Design3. Clic
Page 299 and 300:
Chapter 11 - Assembly Design1. Sele
Page 301 and 302:
Chapter 11 - Assembly Design‣ To
Page 303 and 304:
Chapter 11 - Assembly Design3. Clic
Page 305 and 306:
Chapter 11 - Assembly Design11.3.12
Page 307 and 308:
Page 309 and 310:
Chapter 11 - Assembly Design2. Sele
Page 311 and 312:
Page 313 and 314:
Chapter 11 - Assembly Design• In
Page 315 and 316:
Page 317 and 318:
Page 319 and 320:
Chapter 11 - Assembly Design2. To e
Page 321 and 322:
Chapter 11 - Assembly Design11.7.3
Page 323 and 324:
Chapter 11 - Assembly Design2. In t
Page 325 and 326:
Chapter 11 - Assembly Design4. If d
Page 327 and 328:
Chapter 11 - Assembly Design3. To u
Page 329 and 330:
Chapter 11 - Assembly DesignThe wor
Page 331 and 332:
Page 333:
Page 336 and 337:
Chapter 12 - Drawings12.1 Creating
Page 338 and 339:
Chapter 12 - Drawings12.1.5 Inserti
Page 340 and 341:
Chapter 12 - DrawingsThe Drawing Ex
Page 342 and 343:
Chapter 12 - Drawings2. Using the D
Page 344 and 345:
Chapter 12 - DrawingsIf you choose
Page 346 and 347:
Chapter 12 - DrawingsThis dialog is
Page 348 and 349:
Chapter 12 - Drawings12.3.6 Drawing
Page 350 and 351:
Chapter 12 - DrawingsA sheet bounda
Page 352 and 353:
Chapter 12 - Drawings12.3.11 Center
Page 354 and 355:
Chapter 12 - Drawings3. Right-click
Page 356 and 357:
Chapter 12 - Drawings• Comment: I
Page 358 and 359:
Chapter 12 - Drawings3. Click the C
Page 360 and 361:
Chapter 12 - Drawings2. Follow the
Page 362 and 363:
Chapter 12 - Drawings6. To resize t
Page 364 and 365:
Chapter 12 - Drawings12.4.1 Placing
Page 366 and 367:
Chapter 12 - Drawings12.4.4 Modifyi
Page 368 and 369:
Chapter 12 - Drawings12.4.6 Dimensi
Page 370 and 371:
Chapter 12 - DrawingsKeep Existing
Page 372 and 373:
Chapter 12 - Drawings12.5.3 Detail
Page 374 and 375:
Chapter 12 - Drawings4. Move the cu
Page 376 and 377:
Chapter 12 - Drawings‣ To create
Page 378 and 379:
Chapter 12 - Drawings4. Specify the
Page 380 and 381:
Chapter 12 - Drawings‣ To modify
Page 382 and 383:
Chapter 12 - Drawings4. Make any ne
Page 384 and 385:
Chapter 12 - Drawings12.6.1 Creatin
Page 386 and 387:
Chapter 12 - Drawings12.6.3 Saving
Page 388 and 389:
Chapter 12 - Drawings6. From the Sk
Page 390 and 391:
Chapter 12 - Drawings6. If you want
Page 392 and 393:
Chapter 12 - Drawings2. Right-click
Page 394 and 395:
Chapter 12 - Drawings9. Click Apply
Page 396 and 397:
Chapter 12 - Drawings11. Click OK.T
Page 398 and 399:
Chapter 12 - DrawingsSymbol Control
Page 400 and 401:
Chapter 12 - Drawings8. If you want
Page 402 and 403:
Chapter 12 - Drawings2. Move the cu
Page 404 and 405:
Chapter 13 - Bills of Material13.1
Page 406 and 407:
Chapter 13 - Bills of Material6. If
Page 408 and 409:
Chapter 13 - Bills of MaterialWhen
Page 410 and 411:
Chapter 13 - Bills of Material13.3.
Page 412 and 413:
Chapter 13 - Bills of Material‣ T
Page 414 and 415:
Chapter 13 - Bills of Material1. Se
Page 416 and 417:
Chapter 13 - Bills of MaterialRegul
Page 418 and 419:
Chapter 13 - Bills of MaterialIn a
Page 420 and 421:
Page 422 and 423:
Chapter 13 - Bills of Material2. Ri
Page 424 and 425:
Chapter 13 - Bills of MaterialOr fr
Page 426 and 427:
Page 428 and 429:
Chapter 13 - Bills of MaterialBefor
Page 430 and 431:
Chapter 13 - Bills of Material13.4.
Page 432 and 433:
Chapter 14 - Importing and Exportin
Page 434 and 435:
Page 436 and 437:
Page 438 and 439:
Page 440 and 441:
Page 442 and 443:
Chapter 15 - The Repository15.1 Rep
Page 444 and 445:
Chapter 15 - The Repository15.2.2 M
Page 446 and 447:
Chapter 15 - The RepositoryUnknowns
Page 448 and 449:
Chapter 15 - The Repository15.4.2 W
Page 450 and 451:
Chapter 15 - The Repository6. Click
Page 452 and 453:
Chapter 15 - The Repository4. Click
Page 454 and 455:
Chapter 15 - The Repository2. Right
Page 456 and 457:
Chapter 15 - The Repository2. Press
Page 458 and 459:
Chapter 15 - The Repository2. Right
Page 460 and 461:
Chapter 15 - The Repository15.18 As
Page 462 and 463:
Chapter 15 - The Repository15.20 Ca
Page 464 and 465:
Chapter 15 - The Repository6. If as
Page 466 and 467:
448Chapter 15 - The Repository
Page 468 and 469:
Chapter 16 - The Message Center16.1
Page 470 and 471:
Chapter 16 - The Message CenterOr r
Page 472 and 473:
Chapter 16 - The Message CenterTo e
Page 474 and 475:
456Chapter 16 - The Message Center
Page 476 and 477:
Chapter 17 - The Team Manager17.1 O
Page 478 and 479:
Chapter 17 - The Team Manager‣ To
Page 480 and 481:
Chapter 17 - The Team Manager17.4 P
Page 482 and 483:
Chapter 18 - Team Design Sessions18
Page 484 and 485:
Chapter 18 - Team Design Sessions3.
Page 486 and 487:
Page 488 and 489:
Page 490 and 491:
Page 492 and 493:
Chapter 18 - Team Design Sessions
Page 494 and 495:
Page 496 and 497:
Page 498 and 499:
Chapter 18 - Team Design SessionsRe
Page 500 and 501:
Page 502 and 503:
Chapter 18 - Team Design SessionsTo
Page 504 and 505:
Chapter 18 - Team Design SessionsGr
Page 506 and 507:
Page 508 and 509:
Chapter 18 - Team Design Sessions1.
Page 511 and 512:
Chapter 19 - Alibre MotionC HAPTER
Page 513 and 514:
Chapter 19 - Alibre Motion19.2 Inst
Page 515 and 516:
Chapter 19 - Alibre MotionRegenerat
Page 517 and 518:
Chapter 19 - Alibre MotionFixed Par
Page 519 and 520:
Chapter 19 - Alibre Motiona. end of
Page 521 and 522:
Chapter 19 - Alibre MotionThis form
Page 523 and 524:
Chapter 19 - Alibre Motion3. Check
Page 525 and 526:
Chapter 19 - Alibre MotionVideo Gen
Page 527 and 528:
Chapter 19 - Alibre MotionNote: You
Page 529 and 530:
Chapter 19 - Alibre Motion19.5.2 Ac
Page 531 and 532:
Chapter 19 - Alibre Motion• Presc
Page 533 and 534:
Chapter 19 - Alibre MotionActuator
Page 535 and 536:
Chapter 19 - Alibre MotionPrescribe
Page 537 and 538:
Chapter 19 - Alibre Motion6. Select
Page 539 and 540:
Chapter 19 - Alibre Motion‣ To En
Page 541 and 542:
Chapter 19 - Alibre Motion• Error
Page 543 and 544:
Chapter 19 - Alibre MotionBuild Rea
Page 545 and 546:
Chapter 19 - Alibre Motion19.6.5 Cr
Page 547 and 548:
Chapter 19 - Alibre Motion19.6.8 Si
Page 549 and 550:
Chapter 19 - Alibre Motion• Video
Page 551 and 552:
Chapter 19 - Alibre MotionAs above,
Page 553 and 554:
Chapter 19 - Alibre MotionThe posit
Page 555 and 556:
Chapter 19 - Alibre Motion1. In Out
Page 557 and 558:
Chapter 19 - Alibre MotionOnce you
Page 559 and 560:
Chapter 19 - Alibre Motion3. In Exp
Page 561 and 562:
Chapter 19 - Index3Index3D PDF Publ
Page 563 and 564:
Chapter 19 - IndexCopying and Pasti
Page 565 and 566:
Chapter 19 - Indexmenu • 190mirro
Page 567 and 568:
Chapter 19 - IndexManually Updating
Page 569 and 570:
Chapter 19 - IndexRenaming a Folder
Page 571 and 572:
Chapter 19 - IndexSweep cut • 162
show all

Alibre Design

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?