Alibre Design

Chapter 10 - Design ConfigurationsThe following table describes how each lock function will affect the model behavior:Individual Lock Locked Behavior (Checked) Unlocked Behavior(Unchecked)GeneralParametervaluesPart Data(GeneralProperties)ColorPropertiesReferenceGeometryHidingActive SectionViewAny parameters added to theactive configuration will alsobe applied with their initialvalues to all lockedconfigurations.However, any changes toparameter values will not beapplied to lockedconfigurations.Changes to the activeconfiguration's Part Dataproperty values will beignored in all lockedconfigurations.Note that the Name, Number,and Description fields in thePart Data will be the same forall configurations. The locksapply to the property values.Changes to the edge and/orface colors of the activeconfiguration will be ignoredin all locked configurations.Hiding and unhiding ofreference geometry in theactive configuration is ignoredin all locked configurations.Choosing to activate ordeactivate the view of a 3Dsection view in the activeconfiguration is ignored in alllocked configurations.Any parameters added tothe active configurationwill be applied with theirinitial values to allunlocked configurations.In addition, any changesto parameter values willalso be applied to allunlocked configurations.Changes to the activeconfiguration's Part Dataproperty values will beapplied to all unlockedconfigurations.Changes to the edgeand/or face colors of theactive configuration willalso be applied to allunlocked configurations.Hiding and unhiding ofreference geometry inthe active configurationwill be applied to allunlocked configurations.Activating or deactivatingthe view of a 3D sectionview in the activeconfiguration alsochanges the view state ofall unlockedconfigurations.256