Alibre Design

More documents

Recommendations

Info

Chapter 4 - SketchingThe Shape dialog for the chosen shape appears, and a preview of the figure is shown inthe work area. This example shows the Round Shape Dialog.2. Fill in the appropriate values for the chosen shape:RoundIn the Diameter [D] field, enter the desired value for the diameter.SquareIn the Side length along X field, enter the desired value for the side length of the square.In the Angle field, enter the desired angle, measured from the x-axis.ObroundIn the Side length along X field, enter the desired value for the length of the shape.In the Side length along Y field, enter the desired value for the width of the shape.In the Angle field, enter the desired angle from the x-axis, if any.72
Chapter 4 - SketchingRectangleIn the Side length along X field, enter the desired value for the side length of the rectangle.In the Side length along Y field, enter the desired value for the width of the rectangle.In the Angle field, enter the desired angle, measured from the x-axis.Rectangle with R cornerIn the Side length along X field, enter the desired value for the side length of the rectangle.In the Side length along Y field, enter the desired value for the width of the rectangle.In the Radius field, enter the value for the radius of the corners.In the Angle field, enter the desired angle, measured from the x-axis.Single DIn the Side length along X field, enter the desired value for the side length of the single D.In the Side length along Y field, enter the desired value for the width of the single D.In the Angle field, enter the desired angle, if any, measured from the x-axis.Double DIn the Side length along X field, enter the desired value for the side length of the double D.In the Side length along Y field, enter the desired value for the width of the double D.In the Angle field, enter the desired angle, if any, measured from the x-axis.In the Pattern Type field, select the pattern type you desire.3. In the Pattern Parameter field, enter the values that apply for the pattern type you selected.4. Set the First Shape Anchor location (this option is not in Arc or Circular pattern types). Thisdetermines where the first shape in the pattern will be placed with respect to your mousepointer when you click to place the shape.5. Move your mouse pointer in the work area and click to place the figure. The Round Shapedialog remains open. You can continue to modify the values in the Round Shape dialog asneeded.6. Select Apply to accept the sketch figure. The sketch figure is placed, and centerpoints areshown for each shape. In addition, a preview for a new sketch figure appears with the mousepointer. You can place another sketch shape pattern (you can modify any of the parameterswhen placing the next sketch pattern), or choose Close to exit the Round Shape dialog.Note: Once a sketch shape pattern has been placed, all of the shapes in the pattern are grouped asone sketch figure. You cannot separate them. However, you can edit the shape pattern.73
Page 1 and 2:
Alibre DesignUser Guide9.2
Page 6 and 7:
6.1.4 Parallel Plane Through a Poin
Page 8 and 9:
Working with Parts.................
Page 10 and 11:
11.9.2 Editing a Part in an Assembl
Page 12 and 13:
13.4.11 Modifying the BOM View Styl
Page 14 and 15:
Team Design Sessions ..............
Page 17:
Chapter 1 - InstallationC HAPTER 1I
Page 20 and 21:
Chapter 1 - InstallationAdditional
Page 22 and 23:
Chapter 1 - Installation3. Click In
Page 24 and 25:
Chapter 1 - InstallationWhen you se
Page 27 and 28:
Chapter 2 - Getting Started With Al
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40: Chapter 2 - Getting Started With Al
Page 45: Chapter 2 - Getting Started With Al
Page 48 and 49: Chapter 3 - Introduction to the Des
Page 66 and 67: Chapter 4 - Sketching4.1 The Sketch
Page 68 and 69: Chapter 4 - SketchingRight-click in
Page 70 and 71: Chapter 4 - Sketching4. Release the
Page 72 and 73: Chapter 4 - Sketching1. Select the
Page 74 and 75: Chapter 4 - Sketching3. Hold the Sh
Page 76 and 77: Chapter 4 - Sketching4. Move the mo
Page 78 and 79: Chapter 4 - SketchingTrimming and e
Page 80 and 81: Chapter 4 - Sketching4.3.7 Elliptic
Page 82 and 83: Chapter 4 - SketchingEach sketch sh
Page 84 and 85: Chapter 4 - SketchingStandard Sketc
Page 86 and 87: Chapter 4 - SketchingCheck the box
Page 88 and 89: Chapter 4 - Sketching• Pitch alon
Page 92 and 93: Chapter 4 - Sketching‣ To edit a
Page 94 and 95: Chapter 4 - Sketching4.5.3 Adding F
Page 96 and 97: Chapter 4 - Sketching2. Select the
Page 98 and 99: Chapter 4 - Sketching‣ To create
Page 100 and 101: Chapter 4 - Sketching2. Click the F
Page 102 and 103: Chapter 4 - Sketching4.6.1 Constrai
Page 104 and 105: Chapter 4 - Sketching2. Position th
Page 106 and 107: Chapter 4 - SketchingStatus of enti
Page 108 and 109: Chapter 4 - Sketching4. After the d
Page 110 and 111: Chapter 4 - Sketching3. Dimensions
Page 112 and 113: Chapter 4 - Sketching1. From the Fi
Page 114 and 115: Chapter 4 - SketchingFunctions avai
Page 116 and 117: Chapter 4 - Sketching4.7.7 Modifyin
Page 118 and 119: Chapter 4 - SketchingThe grid acts
Page 120 and 121: Chapter 4 - Sketching4.8.3 Cursor D
Page 122 and 123: Chapter 4 - Sketching3. Select eith
Page 124 and 125: Chapter 4 - Sketching5. Click the A
Page 126 and 127: Chapter 4 - Sketching2. Make the ap
Page 128 and 129: Chapter 5 - 3D Sketching5.1 The 3D
Page 130 and 131: Chapter 5 - 3D Sketching5.1.2 Curre
Page 132 and 133: Chapter 5 - 3D SketchingNotes:This
Page 134 and 135: Chapter 5 - 3D Sketching‣ To cont
Page 136 and 137: Chapter 5 - 3D Sketching3. Click a
Page 138 and 139: Chapter 5 - 3D SketchingEditing a S
Page 140 and 141:
Chapter 5 - 3D Sketching3. Select t
Page 142 and 143:
Chapter 5 - 3D Sketching4. After th
Page 144 and 145:
Chapter 5 - 3D Sketching5.7.2 Expli
Page 147 and 148:
Chapter 6 - Reference GeometryC HAP
Page 149 and 150:
Chapter 6 - Reference Geometry4. Cl
Page 151 and 152:
Chapter 6 - Reference Geometry6.1.4
Page 153 and 154:
Chapter 6 - Reference Geometry6.2 A
Page 155 and 156:
Chapter 6 - Reference Geometry‣ T
Page 157 and 158:
Page 159 and 160:
Chapter 6 - Reference GeometryThe s
Page 161 and 162:
Page 163:
Chapter 6 - Reference Geometry6.6 R
Page 166 and 167:
Chapter 7 - Feature Creation7.1 The
Page 168 and 169:
Chapter 7 - Feature CreationCutCut
Page 170 and 171:
Chapter 7 - Feature CreationTo Geom
Page 172 and 173:
Chapter 7 - Feature Creation‣ To
Page 174 and 175:
Chapter 7 - Feature Creation2. Make
Page 176 and 177:
Chapter 7 - Feature Creation7.5 Lof
Page 178 and 179:
Chapter 7 - Feature Creation7. If d
Page 180 and 181:
Chapter 7 - Feature CreationLoft Us
Page 182 and 183:
Chapter 7 - Feature CreationFigure
Page 184 and 185:
Chapter 7 - Feature Creation10. To
Page 186 and 187:
Chapter 7 - Feature Creation7. Sele
Page 188 and 189:
Page 190 and 191:
Chapter 7 - Feature Creation7.9 Cha
Page 192 and 193:
Chapter 7 - Feature Creation4. Clic
Page 194 and 195:
Page 196 and 197:
Chapter 7 - Feature Creation7.13 Ca
Page 198 and 199:
Chapter 7 - Feature Creation7.14 Co
Page 200 and 201:
Chapter 7 - Feature Creation‣ To
Page 202 and 203:
Page 204 and 205:
Chapter 7 - Feature Creation• Boo
Page 206 and 207:
Chapter 7 - Feature Creation2. In S
Page 208 and 209:
Chapter 8 - Sheet Metal Feature Cre
Page 210 and 211:
Page 212 and 213:
Page 214 and 215:
Page 216 and 217:
Page 218 and 219:
Page 220 and 221:
Page 222 and 223:
Page 224 and 225:
Chapter 9 - Working with Parts9.1 S
Page 226 and 227:
Chapter 9 - Working with Parts2. To
Page 228 and 229:
Chapter 9 - Working with PartsThe f
Page 230 and 231:
Chapter 9 - Working with PartsThe F
Page 232 and 233:
Chapter 9 - Working with PartsNote:
Page 234 and 235:
Chapter 9 - Working with Parts6. Cl
Page 236 and 237:
Chapter 9 - Working with Parts9.9 U
Page 238 and 239:
Chapter 9 - Working with Parts9.10.
Page 240 and 241:
Page 242 and 243:
Chapter 9 - Working with Parts13. C
Page 244 and 245:
Chapter 9 - Working with PartsClick
Page 246 and 247:
Chapter 9 - Working with Parts5. Cl
Page 248 and 249:
Page 250 and 251:
Page 252 and 253:
Page 254 and 255:
Page 256 and 257:
Chapter 9 - Working with PartsTempl
Page 258 and 259:
Page 260 and 261:
Chapter 9 - Working with Parts• M
Page 262 and 263:
Chapter 9 - Working with Parts- OR-
Page 264 and 265:
Chapter 10 - Design Configurations1
Page 266 and 267:
Chapter 10 - Design ConfigurationsR
Page 268 and 269:
Page 270 and 271:
Chapter 10 - Design ConfigurationsT
Page 272 and 273:
Page 274 and 275:
Chapter 10 - Design ConfigurationsT
Page 276 and 277:
Chapter 10 - Design ConfigurationsC
Page 278 and 279:
Page 280 and 281:
Chapter 10 - Design ConfigurationsI
Page 282 and 283:
Chapter 10 - Design Configurations
Page 284 and 285:
Chapter 10 - Design ConfigurationsE
Page 286 and 287:
Chapter 10 - Design ConfigurationsS
Page 288 and 289:
Chapter 10 - Design Configurations
Page 291 and 292:
Chapter 11 - Assembly DesignC HAPTE
Page 293 and 294:
Chapter 11 - Assembly DesignAssembl
Page 295 and 296:
Chapter 11 - Assembly DesignYou can
Page 297 and 298:
Chapter 11 - Assembly Design3. Clic
Page 299 and 300:
Chapter 11 - Assembly Design1. Sele
Page 301 and 302:
Chapter 11 - Assembly Design‣ To
Page 303 and 304:
Chapter 11 - Assembly Design3. Clic
Page 305 and 306:
Chapter 11 - Assembly Design11.3.12
Page 307 and 308:
Page 309 and 310:
Chapter 11 - Assembly Design2. Sele
Page 311 and 312:
Page 313 and 314:
Chapter 11 - Assembly Design• In
Page 315 and 316:
Page 317 and 318:
Page 319 and 320:
Chapter 11 - Assembly Design2. To e
Page 321 and 322:
Chapter 11 - Assembly Design11.7.3
Page 323 and 324:
Chapter 11 - Assembly Design2. In t
Page 325 and 326:
Chapter 11 - Assembly Design4. If d
Page 327 and 328:
Chapter 11 - Assembly Design3. To u
Page 329 and 330:
Chapter 11 - Assembly DesignThe wor
Page 331 and 332:
Page 333:
Page 336 and 337:
Chapter 12 - Drawings12.1 Creating
Page 338 and 339:
Chapter 12 - Drawings12.1.5 Inserti
Page 340 and 341:
Chapter 12 - DrawingsThe Drawing Ex
Page 342 and 343:
Chapter 12 - Drawings2. Using the D
Page 344 and 345:
Chapter 12 - DrawingsIf you choose
Page 346 and 347:
Chapter 12 - DrawingsThis dialog is
Page 348 and 349:
Chapter 12 - Drawings12.3.6 Drawing
Page 350 and 351:
Chapter 12 - DrawingsA sheet bounda
Page 352 and 353:
Chapter 12 - Drawings12.3.11 Center
Page 354 and 355:
Chapter 12 - Drawings3. Right-click
Page 356 and 357:
Chapter 12 - Drawings• Comment: I
Page 358 and 359:
Chapter 12 - Drawings3. Click the C
Page 360 and 361:
Chapter 12 - Drawings2. Follow the
Page 362 and 363:
Chapter 12 - Drawings6. To resize t
Page 364 and 365:
Chapter 12 - Drawings12.4.1 Placing
Page 366 and 367:
Chapter 12 - Drawings12.4.4 Modifyi
Page 368 and 369:
Chapter 12 - Drawings12.4.6 Dimensi
Page 370 and 371:
Chapter 12 - DrawingsKeep Existing
Page 372 and 373:
Chapter 12 - Drawings12.5.3 Detail
Page 374 and 375:
Chapter 12 - Drawings4. Move the cu
Page 376 and 377:
Chapter 12 - Drawings‣ To create
Page 378 and 379:
Chapter 12 - Drawings4. Specify the
Page 380 and 381:
Chapter 12 - Drawings‣ To modify
Page 382 and 383:
Chapter 12 - Drawings4. Make any ne
Page 384 and 385:
Chapter 12 - Drawings12.6.1 Creatin
Page 386 and 387:
Chapter 12 - Drawings12.6.3 Saving
Page 388 and 389:
Chapter 12 - Drawings6. From the Sk
Page 390 and 391:
Chapter 12 - Drawings6. If you want
Page 392 and 393:
Chapter 12 - Drawings2. Right-click
Page 394 and 395:
Chapter 12 - Drawings9. Click Apply
Page 396 and 397:
Chapter 12 - Drawings11. Click OK.T
Page 398 and 399:
Chapter 12 - DrawingsSymbol Control
Page 400 and 401:
Chapter 12 - Drawings8. If you want
Page 402 and 403:
Chapter 12 - Drawings2. Move the cu
Page 404 and 405:
Chapter 13 - Bills of Material13.1
Page 406 and 407:
Chapter 13 - Bills of Material6. If
Page 408 and 409:
Chapter 13 - Bills of MaterialWhen
Page 410 and 411:
Chapter 13 - Bills of Material13.3.
Page 412 and 413:
Chapter 13 - Bills of Material‣ T
Page 414 and 415:
Chapter 13 - Bills of Material1. Se
Page 416 and 417:
Chapter 13 - Bills of MaterialRegul
Page 418 and 419:
Chapter 13 - Bills of MaterialIn a
Page 420 and 421:
Page 422 and 423:
Chapter 13 - Bills of Material2. Ri
Page 424 and 425:
Chapter 13 - Bills of MaterialOr fr
Page 426 and 427:
Page 428 and 429:
Chapter 13 - Bills of MaterialBefor
Page 430 and 431:
Chapter 13 - Bills of Material13.4.
Page 432 and 433:
Chapter 14 - Importing and Exportin
Page 434 and 435:
Page 436 and 437:
Page 438 and 439:
Page 440 and 441:
Page 442 and 443:
Chapter 15 - The Repository15.1 Rep
Page 444 and 445:
Chapter 15 - The Repository15.2.2 M
Page 446 and 447:
Chapter 15 - The RepositoryUnknowns
Page 448 and 449:
Chapter 15 - The Repository15.4.2 W
Page 450 and 451:
Chapter 15 - The Repository6. Click
Page 452 and 453:
Chapter 15 - The Repository4. Click
Page 454 and 455:
Chapter 15 - The Repository2. Right
Page 456 and 457:
Chapter 15 - The Repository2. Press
Page 458 and 459:
Chapter 15 - The Repository2. Right
Page 460 and 461:
Chapter 15 - The Repository15.18 As
Page 462 and 463:
Chapter 15 - The Repository15.20 Ca
Page 464 and 465:
Chapter 15 - The Repository6. If as
Page 466 and 467:
448Chapter 15 - The Repository
Page 468 and 469:
Chapter 16 - The Message Center16.1
Page 470 and 471:
Chapter 16 - The Message CenterOr r
Page 472 and 473:
Chapter 16 - The Message CenterTo e
Page 474 and 475:
456Chapter 16 - The Message Center
Page 476 and 477:
Chapter 17 - The Team Manager17.1 O
Page 478 and 479:
Chapter 17 - The Team Manager‣ To
Page 480 and 481:
Chapter 17 - The Team Manager17.4 P
Page 482 and 483:
Chapter 18 - Team Design Sessions18
Page 484 and 485:
Chapter 18 - Team Design Sessions3.
Page 486 and 487:
Page 488 and 489:
Page 490 and 491:
Page 492 and 493:
Chapter 18 - Team Design Sessions
Page 494 and 495:
Page 496 and 497:
Page 498 and 499:
Chapter 18 - Team Design SessionsRe
Page 500 and 501:
Page 502 and 503:
Chapter 18 - Team Design SessionsTo
Page 504 and 505:
Chapter 18 - Team Design SessionsGr
Page 506 and 507:
Page 508 and 509:
Chapter 18 - Team Design Sessions1.
Page 511 and 512:
Chapter 19 - Alibre MotionC HAPTER
Page 513 and 514:
Chapter 19 - Alibre Motion19.2 Inst
Page 515 and 516:
Chapter 19 - Alibre MotionRegenerat
Page 517 and 518:
Chapter 19 - Alibre MotionFixed Par
Page 519 and 520:
Chapter 19 - Alibre Motiona. end of
Page 521 and 522:
Chapter 19 - Alibre MotionThis form
Page 523 and 524:
Chapter 19 - Alibre Motion3. Check
Page 525 and 526:
Chapter 19 - Alibre MotionVideo Gen
Page 527 and 528:
Chapter 19 - Alibre MotionNote: You
Page 529 and 530:
Chapter 19 - Alibre Motion19.5.2 Ac
Page 531 and 532:
Chapter 19 - Alibre Motion• Presc
Page 533 and 534:
Chapter 19 - Alibre MotionActuator
Page 535 and 536:
Chapter 19 - Alibre MotionPrescribe
Page 537 and 538:
Chapter 19 - Alibre Motion6. Select
Page 539 and 540:
Chapter 19 - Alibre Motion‣ To En
Page 541 and 542:
Chapter 19 - Alibre Motion• Error
Page 543 and 544:
Chapter 19 - Alibre MotionBuild Rea
Page 545 and 546:
Chapter 19 - Alibre Motion19.6.5 Cr
Page 547 and 548:
Chapter 19 - Alibre Motion19.6.8 Si
Page 549 and 550:
Chapter 19 - Alibre Motion• Video
Page 551 and 552:
Chapter 19 - Alibre MotionAs above,
Page 553 and 554:
Chapter 19 - Alibre MotionThe posit
Page 555 and 556:
Chapter 19 - Alibre Motion1. In Out
Page 557 and 558:
Chapter 19 - Alibre MotionOnce you
Page 559 and 560:
Chapter 19 - Alibre Motion3. In Exp
Page 561 and 562:
Chapter 19 - Index3Index3D PDF Publ
Page 563 and 564:
Chapter 19 - IndexCopying and Pasti
Page 565 and 566:
Chapter 19 - Indexmenu • 190mirro
Page 567 and 568:
Chapter 19 - IndexManually Updating
Page 569 and 570:
Chapter 19 - IndexRenaming a Folder
Page 571 and 572:
Chapter 19 - IndexSweep cut • 162
show all

Alibre Design

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?