Alibre Design

Chapter 12 - Drawings2. Select the Select tool from the View toolbar if it is not already selected.3. Move the cursor over the view. A red view boundary appears and the cursor changes.4. To reposition a view or the views, click and hold the mouse button, and move the cursor. Theselected view and all associated views move.5. Release the mouse button to place the views.Note: You can break an individual view's dependence on other views by right-clicking the view andun-checking the Align toggle in the pop-up menu. You can again establish the alignment by recheckingthe Align toggle.12.3.8 View and Sheet BoundariesA red view boundary is highlighted as you move the cursor over a view. The view boundary isdisplayed both in and out of sketch mode. The boundary size is calculated automatically based onthe extents of the view. Consequently, you cannot change the size of the view boundary.You can only work on a view (e.g. add dimensions, sketch figures, etc.) when the view boundary isdisplayed around it. The view boundary indicates the view is active. Any items added to the viewwhen it is active will be associated with the view. If the view is moved, the inserted items will movewith it.331