Installation Manual - Fireplaces
Installation Manual - Fireplaces
Installation Manual - Fireplaces
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Installation</strong> (for qualified installers only) 15Nailing BracketsThere are four nailing bracketson the front of the fireplace.Follow the directions below toprepare the nailing brackets.Once in place, nail or screw thenailing brackets to the framing.NOTE: Additional nailingbrackets are provided alongthe base of the fireplace.Use these brackets if notusing the front brackets.WARNING:Make sure the fireplace issquare and plumb whenplaced in the framing.Measured corner-tocorner,the fireplaceshould be square (approx.47-1/8" (1197mm) for eachdimension). Use shims toinsure the fireplace issquare.1/2" (13mm)DrywallTOP VIEWFramingFor installations using1/2" (13mm) facing foldthe larger tab out 90°(use a screwdriver ifnecessary).FireplaceDrywallNailing Bracket5/8" (0.625mm) DrywallFor installations using5/8" (0.625mm) drywallfold the shorter tab out90° (use a screwdriver ifnecessary).TOP VIEWFireplaceFramingDrywallNailing Bracket© Travis Industries 4081126 100-01210_000